Construction
Concrete, masonry, areas, materials: get the exact quantities for your job site and avoid waste.
- Construction Brick calculator Estimate how many bricks and bags of mortar a wall needs, for modular, standard, queen or king size brick.
- Construction Concrete Volume & Mix Calculator Work out how much concrete your slab, footing or column needs, then the number of cement bags, the weight of sand and gravel and the water to add.
- Construction Concrete block calculator Enter the wall size and openings to get the number of concrete masonry units, courses, mortar bags and the cost of your block wall.
- Construction Deck board calculator Count the deck boards, joists and screws for a rectangular deck, with board width, gap, joist spacing and waste.
- Construction Fence calculator Plan a fence line: number of posts and panels, bags of concrete to set the posts, and the total materials budget.
- Construction Flooring calculator Find the square footage to buy with the right waste factor, the number of boxes, underlayment rolls and baseboard pieces.
- Construction Gravel calculator Turn the size and depth of a driveway, path or drainage bed into cubic yards and tons of gravel, with bags and delivery cost.
- Construction Insulation R-value calculator Find the R-value of an insulation layer, the thickness needed to reach a target such as R-49, and how much heat loss it saves.
- Construction Paint calculator Work out the wall and ceiling area to paint, the gallons you need and the cost, with doors and windows deducted and any number of coats.
- Construction Paver calculator Count the pavers for a patio, walkway or driveway, plus the compacted gravel base, bedding sand, edging and total cost.
- Construction Pool volume calculator Find how many gallons your pool holds, rectangular, round or oval, with a sloped bottom, plus fill time, salt and pump flow.
- Construction Rebar calculator Lay out a rebar grid for a concrete slab: bars each way, linear feet, 20 ft sticks to buy with lap splices, weight and chairs.
- Construction Roofing calculator: pitch, squares and shingles From the building footprint and the roof pitch, get the pitch angle, rafter length, roof area in squares, shingle bundles and underlayment rolls.
- Construction Sand calculator Work out how much sand a sandbox, paver bed or fill job needs, in cubic yards, tons and bags.
- Construction Square footage calculator Calculate the square footage and perimeter of a rectangular, L-shaped, round or triangular space, then how much flooring to buy and what it will cost.
- Construction Stair calculator Enter the total rise and the run available to get the number of risers and treads, riser height, tread depth, stair angle and stringer length, checked against common residential code limits.
- Construction Tank volume calculator Calculate the capacity of a vertical or horizontal cylinder or a rectangular tank, and how many gallons are left at a given liquid level.
- Construction Tile calculator Calculate the square footage, the number of tiles and boxes including waste, plus the thinset and grout you need for a floor, wall or backsplash.
- Construction Wallpaper calculator Count the strips and rolls you need from the room size, wall height, roll dimensions and pattern repeat.