Skip to content
Omnikalc

How much does chimney repair cost?

Enter the crown repair, the flashing, the liner length and price per foot, the chimney cap and the inspection: get the liner cost and the total.

Updated on
Your inputs
$

Value out of range

$

Value out of range

ft

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Total cost

$3,900

Water is the main enemy of a chimney: a cracked crown, loose flashing or missing cap let rain in and turn small repairs into a rebuild; have it inspected every year if you burn wood
Liner
$1,750

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. A chimney spends its life exposed to rain, freezing and hot, acidic flue gases. The damage usually starts small: a cracked crown, a gap in the flashing where the chimney meets the roof, or a missing cap that lets water and animals in. Left alone, water works into the masonry and the flue, and a repair that cost a few hundred dollars becomes a partial rebuild. This calculator adds the most common repairs so you can compare quotes.

How the calculation works

  • Liner = liner length × liner price per foot
  • Total cost = crown repair + flashing + liner + chimney cap + inspection

A $1,000 crown repair, $600 of flashing, 25 ft of stainless steel liner at $70 per foot ($1,750), a $300 cap and a $250 inspection cost $3,900 in total.

Typical prices

Repair Typical price
Level 2 inspection with camera $200 to $500
Crown repair or sealing $300 to $1,500
Crown rebuild $1,000 to $3,000
Flashing repair or replacement $300 to $1,000
Stainless steel liner $50 to $100 per ft installed
Chimney cap $150 to $500
Tuckpointing $10 to $25 per sq ft
Rebuild above the roofline $3,000 to $10,000

When a liner is needed

A clay flue that is cracked, a new wood stove or insert, or switching to a gas appliance often calls for a stainless steel liner sized to the appliance. A properly sized liner improves draft, keeps creosote and condensation off the masonry and is required by most manufacturers’ installation instructions.

Spotting problems early

Look for white staining on the bricks, crumbling mortar, rust on the damper or firebox, water in the firebox after rain, or stains on the ceiling near the chimney. Have a certified sweep inspect the chimney once a year if you burn wood, and after a chimney fire, a storm or an earthquake. Waterproofing the masonry with a vapor-permeable sealer after repairs helps it last.

Frequently asked questions

How much does chimney repair cost?

About $3,900 for a $1,000 crown repair, $600 of flashing, 25 ft of liner at $70, a $300 cap and a $250 inspection.

How much does a chimney liner cost?

A stainless steel liner usually costs $50 to $100 per foot installed.

How often should a chimney be inspected?

Once a year, and after a chimney fire or a major storm.

What causes most chimney damage?

Water entering through a cracked crown, loose flashing or a missing cap.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.