Skip to content
Omnikalc

Curing compound calculator: how much membrane curing compound a slab needs

Enter the area, the coverage rate, the number of coats, the waste allowance and the container size to get the gallons needed, the containers to buy and the wet film thickness.

Updated on
Your inputs
ft²

Value out of range

Value out of range

%

Value out of range

Results

Containers to buy

6

Compound needed
27.5 gal
Total volume purchased
30 gal
Wet film thickness per coat
8.0 mil

The curing compound calculator gives the volume of compound, the number of containers, the total volume purchased and the wet film thickness for the membrane curing of a concrete slab, from the area, the coverage rate, the number of coats and the waste allowance.

How the calculation works

  • Enter the surface area of the slab or the pavement and choose the coverage rate of the curing compound from the data sheet.
  • Enter the number of coats and the allowance for waste and overspray, then choose the container size.
  • The calculator finds the volume of compound needed, the number of containers to buy, the total volume purchased and the wet film thickness per coat.

Example

A slab of 5,000 ft² is sprayed with one coat of a compound that covers 200 ft²/gal, with an allowance of 10 % for waste. The volume is 5,000 / 200 × 1 × 1.10 = 27.5 gal. With 5 gallon pails, 27.5 / 5 = 5.5, so 6 pails are bought, or 30 gal in all. The wet film thickness of one coat is 1,604 / 200 = 8.0 mil.

Why it matters

The calculator helps concrete contractors, estimators, suppliers and students to order the right quantity of curing compound for a floor, a pavement or a bridge deck, to compare the container sizes and to check the film thickness of the product.

Good to know

Apply the compound with a clean sprayer, in a uniform film, at the rate of the data sheet, and cover the edges and the sides of the slab as well. Do not walk on the surface or let the rain wash the compound during the first hours. If a floor covering, a paint or a sealer will be applied later, choose a compound that is compatible or that disappears with time, and keep a record of the quantity used to check the rate.

The concrete curing calculator plans the curing time and the strength gain, the concrete sealer calculator estimates the sealer for the surface, the concrete volume calculator gives the quantity of concrete and the slab joint spacing calculator checks the joints of the slab.

Frequently asked questions

What is a curing compound?

A curing compound is a liquid sprayed on the surface of fresh concrete after the finishing, which forms a membrane that keeps the water in the concrete. This allows the cement to hydrate and the surface to gain strength and to resist the abrasion and the cracking. It is a common way to cure slabs, pavements and walls when water curing is not practical.

What is the usual coverage rate?

The standard ASTM C309 and the usual data sheets give a coverage of about 200 ft²/gal (5 m²/L), which is a wet film of 8 mil (200 µm). The rate must be checked with the product, because some compounds need less, and a rough or broomed surface needs more compound than a smooth surface. Two coats at right angles to each other are often used to cover the surface well.

When should the compound be applied?

The compound is applied just after the finishing and when the bleed water has gone and the sheen has disappeared from the surface. If it is applied too early, it is mixed with the bleed water, and if it is applied too late, the surface has dried and the curing is not good. On formed surfaces, it is applied as soon as the forms are removed, and the surface is wetted first.

What are the limits of the calculator?

The calculator uses the coverage that you enter and the area in plan. It does not include the vertical faces, the edges, the texture, the wind, the cost, the compatibility of the compound with a later sealer, a paint or a flooring, or the white pigment that reflects the heat. Check the data sheet of the product, which gives the rate, the application and the compatibility.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.