Skip to content
Omnikalc

How much does it cost to pave a driveway?

Enter the driveway length and width, the material, whether you remove an old driveway and your extras: get the area, the total cost, the cost per square foot and the cost per year of life.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

$

Value out of range

Results

Estimated total cost

$4,700

Cost per year of expected life

$235

Asphalt lasts about 20 years, concrete 30, pavers 40 and gravel about 10 before the surface needs to be rebuilt, if the base is sound and the driveway is maintained
Driveway area
600 sq ft
Cost per square foot
$7.83

A driveway is one of the first things people see about a house, and one of the biggest outdoor expenses. The price depends mostly on its area and the material: asphalt and concrete sit in the middle, pavers cost the most and gravel the least. This calculator multiplies the area by the price per square foot of your chosen material, adds demolition of an old driveway if needed, plus your extras, and shows the cost per square foot and per year of expected life.

How the calculation works

  • Area = length × width
  • Material cost = area × price per square foot of the chosen material
  • Removal = area × $3 per square foot, if you tear out an old driveway
  • Total = material cost + removal + extras
  • Cost per year = total ÷ expected life of the material

Example

A 50 ft by 12 ft driveway has 600 sq ft. Paved with asphalt at $7 a square foot and $500 for grading and drainage, it costs $4,700, or about $7.83 a square foot. With an expected life of 20 years, that is about $235 a year. The same driveway in concrete costs about $5,900, in pavers about $12,500 and in gravel about $2,000.

Material comparison

  • Asphalt is flexible, quick to install and easy to repair, and it needs sealing every few years. It softens in extreme heat.
  • Concrete is stiff and clean-looking, lasts longer and needs less maintenance, but cracks can be hard to hide and de-icing salts can damage it.
  • Pavers (brick, stone or concrete) can be lifted and replaced one at a time and look the best, but they cost two to three times as much and need weed and sand upkeep.
  • Gravel is cheap and drains well, but it needs regular topping up, shifts under traffic and can be difficult to plow.

What changes the price

The base layer under the surface matters as much as the surface. A well-compacted stone base of 6 to 8 inches prevents cracks and potholes, and poor soil or poor drainage requires more. Slopes, curves, tree roots, utility lines, tear-out of an old driveway and the distance to the asphalt plant all raise the bid. Prices also vary by region and season. Get at least three written quotes, and check whether your city requires a permit for a curb cut or for work that changes stormwater flow.

Frequently asked questions

How much does a new driveway cost?

Roughly $4 to $12 per square foot for asphalt or concrete, so $2,500 to $7,000 for a one-car-wide drive.

Which driveway material lasts longest?

Pavers, often 40 years or more, followed by concrete at around 30 years.

Does a driveway need a permit?

Not always, but a curb cut or a change in drainage usually does; call your city.

How much cheaper is gravel?

Often a third of asphalt, but it needs regular raking and new stone every few years.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.