Skip to content
Omnikalc

How much does a residential dumbwaiter cost?

Enter the dumbwaiter unit, the shaft construction, the electrical work, the installation, the yearly maintenance and the years: get the installed cost and the total over time.

Updated on
Your inputs
$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Value out of range

Results

Installed cost

$10,600

Total over the years

$13,100

Residential dumbwaiters usually carry 50 to 100 pounds between floors for groceries, laundry or firewood; building the shaft during new construction or a remodel costs far less than cutting through finished floors, and the unit must never carry people

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. A dumbwaiter is a small freight elevator that carries groceries, laundry, firewood, dishes or packages between floors, so nobody has to haul heavy loads up and down the stairs. Residential models carry about 50 to 100 pounds in a car roughly 2 feet square and run on a cable or a belt with an electric motor. This calculator adds the unit, the shaft construction, the electrical work and the installation, then the yearly maintenance over the years you plan to own it.

How the calculation works

  • Installed cost = dumbwaiter unit + shaft construction + electrical work + installation
  • Total over the years = installed cost + maintenance per year × years

A $5,000 dumbwaiter with $3,000 of shaft framing, $600 of electrical work and $2,000 of installation costs $10,600. With $250 of service a year, 10 years cost $13,100 in all.

Typical prices

Item Typical price
Manual or basic electric dumbwaiter $2,000 to $5,000
Residential electric dumbwaiter, 2 floors $4,000 to $10,000
Each additional stop $1,000 to $3,000
Building the shaft in an existing home $2,000 to $8,000
Electrical circuit $300 to $1,000
Installation $1,500 to $4,000
Yearly maintenance $150 to $400

Planning the shaft

The shaft is often the biggest variable. In new construction or a major remodel, the builder simply frames a vertical chase between floors, often stacked closets, which keeps the cost down. In a finished home, cutting through floors, rerouting plumbing or wiring and patching walls can cost as much as the unit itself. Garages, basements and kitchens are common stops, and a top-of-car or bottom-drive machine changes how much headroom you need.

Safety and upkeep

A dumbwaiter must never carry people or pets, and residential units should have interlocked doors that stay closed unless the car is at that floor. Most local codes follow the ASME A17.1 standard and may require a permit and an inspection. A yearly service checks the cables, brakes and door locks. For carrying people, a stair lift or a home elevator is the right choice, though both cost much more.

Frequently asked questions

How much does a residential dumbwaiter cost?

About $10,600 for a $5,000 unit with shaft framing, electrical work and installation.

What does a dumbwaiter cost over 10 years?

About $13,100 with $250 a year of maintenance.

How much can a home dumbwaiter carry?

Usually 50 to 100 pounds.

Can a dumbwaiter carry people?

No, never; use a stair lift or home elevator instead.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.