Shelving along one garage wall can clear the floor of boxes, bins and tools. This calculator works out how many standard shelving units fit on the wall, how much shelf area and load capacity that gives, and how many storage bins they hold.
How the calculation works
- Units that fit = wall length ÷ unit width, rounded down
- Wall left over = wall length − units × unit width
- Shelves = units × shelves per unit
- Shelf area = shelves × unit width × depth
- Total rated load = shelves × rated load per shelf
- Storage bins = bins that fit across a shelf × shelves
An 18 ft wall fits 4 units 48 in wide, with 24 in of wall left over for a broom or a ladder. With 5 shelves each, that is 20 shelves. At 24 in deep they give about 160 sq ft of storage. Rated at 350 lb a shelf, the total is 7,000 lb, and bins 16 in wide fit 3 across, so 60 bins in all.
Choosing shelving
| Type | Typical load per shelf | Notes |
|---|---|---|
| Plastic shelving | 50 to 150 lb | light items, damp-proof |
| Boltless steel with particleboard | 300 to 800 lb | the most common garage choice |
| Wire shelving | 300 to 600 lb | lets air through, good for damp garages |
| Wall-mounted track system | 50 to 200 lb per bracket | keeps the floor clear |
| Overhead ceiling racks | 250 to 600 lb per rack | for seasonal items |
A rated load assumes the weight is spread evenly. Point loads, such as a heavy toolbox in the middle of a long shelf, need less weight or a stronger deck.
Planning tips
- Depth: 18 to 24 in suits most bins and boxes. Deeper shelves are hard to reach into; keep them for bulky items.
- Bins: common 18 to 27 gal totes are about 15 to 20 in wide. Measure your bins before choosing shelf spacing.
- Anchor tall units to wall studs so they cannot tip, especially when a child climbs or a car bumps them.
- Keep the heaviest items on the lowest shelves and the things you use most at waist to shoulder height.
- Leave space in front for car doors to open and keep the garage door track and the electrical panel clear.