Skip to content
Omnikalc

How much does it cost to rewire a house?

Enter the floor area, the rewiring price per square foot, the new panel, the drywall and paint repairs and the permit: get the wiring cost, the total and the total per square foot.

Updated on
Your inputs
sq ft

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Total cost

$15,800

Total per sq ft

$10.53

Knob-and-tube or aluminum wiring, frequent breaker trips, warm outlets and a burning smell are reasons to call a licensed electrician; rewiring during a remodel, when walls are open, costs much less
Wiring
$12,000

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. Old wiring is one of the main causes of house fires. Homes built before the 1970s may still have knob-and-tube or aluminum branch wiring, ungrounded outlets and too few circuits for modern appliances. Rewiring replaces the cables, outlets, switches and often the panel, and the price depends mostly on the size of the home and how hard it is to reach the walls. This calculator adds the wiring, the panel, the wall repairs and the permit.

How the calculation works

  • Wiring = floor area × rewiring price per square foot
  • Total cost = wiring + new panel + drywall and paint repairs + permit and inspection
  • Total per square foot = total ÷ floor area

Rewiring a 1,500 sq ft house at $8 per square foot costs $12,000. A $2,000 panel, $1,500 of drywall and paint repairs and a $300 permit bring the total to $15,800, or $10.53 per square foot.

Typical prices

Item Typical price
Full rewiring $6 to $12 per sq ft
Rewiring during a gut remodel $3 to $6 per sq ft
New 200-amp panel $1,500 to $4,000
Adding a circuit $150 to $500
Replacing an outlet or switch $100 to $250 each
Drywall patching and paint $1,000 to $5,000
Permit and inspection $100 to $500

Signs you need rewiring

  • Knob-and-tube or aluminum branch wiring
  • Two-prong outlets with no ground
  • Breakers that trip or fuses that blow often
  • Outlets or switch plates that feel warm, buzz or spark
  • A burning smell or scorch marks
  • Lights that flicker when appliances start

Ways to keep the cost down

Rewire during a remodel, when walls and ceilings are already open, which can halve the labor. Electricians can often fish new cables through walls from the attic and basement with small openings. Get two or three detailed quotes that include patching and the permit, and ask whether partial rewiring of the oldest circuits is enough.

Insurance and resale

Some insurers refuse or surcharge homes with knob-and-tube wiring, and buyers’ inspectors flag it. Rewiring can lower insurance premiums and make the house easier to sell. Always hire a licensed electrician and keep the permit and inspection records.

Frequently asked questions

How much does it cost to rewire a house?

About $15,800 for a 1,500 sq ft home at $8 per sq ft of wiring ($12,000) plus the panel, permit and wall repairs, or about $10.53 per sq ft overall.

How much does rewiring cost per square foot?

Wiring alone usually runs $6 to $12 per square foot, before drywall patching and permits.

How long does it take to rewire a house?

Most homes take 3 to 10 working days, depending on size and access.

When should a house be rewired?

Knob-and-tube or aluminum wiring, frequent breaker trips, warm outlets and a major remodel are common reasons.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.