Skip to content
Omnikalc

How many acoustic panels does a music room need?

Enter the room length, width and height, the size of one acoustic panel and the share of the walls to cover: get the floor area, the wall area, the room volume and the panels to buy.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

sq ft

Value out of range

%

Value out of range

Results

Acoustic panels

9

Put the first panels at the mirror points on the side walls and behind the player, add bass traps in the corners for drums or amplifiers, and remember that panels tame echo inside the room but do not stop sound from reaching the neighbors
Floor area
120 sq ft
Wall area
352 sq ft
Room volume
960 cu ft

A small room with hard walls makes music sound harsh: notes ring on, flutter between parallel walls and blur together. Acoustic panels absorb part of that sound so you hear yourself clearly while practicing or recording. This calculator works out the floor area, the wall area, the room volume and how many panels it takes to cover a chosen share of the walls.

How the calculation works

  • Floor area = length × width
  • Wall area = 2 × (length + width) × ceiling height
  • Room volume = floor area × ceiling height
  • Acoustic panels = wall area × share to cover ÷ area of one panel, rounded up

A 12 × 10 ft room with an 8 ft ceiling has 120 sq ft of floor, 352 sq ft of walls and 960 cu ft of air. Covering 20% of the walls with 2 × 4 ft panels, each 8 sq ft, takes 9 panels.

How much to cover

Use Share of the walls
Practice room, acoustic instruments 15 to 25%
Home recording or vocal booth 25 to 40%
Drum room 20 to 30%, plus bass traps
Listening room 15 to 25%, placed at reflection points

Too much soft material makes a room sound dead and dull, so treat in steps and listen.

Where to put the panels

  • First reflection points on the side walls: sit in the playing or listening spot and have a friend slide a mirror along the wall; where you see the source, place a panel.
  • Behind the player or the speakers, and on the wall facing them.
  • Corners for bass traps, which control boomy low notes from drums, bass and amplifiers.
  • A ceiling cloud above the player helps in low rooms.

Treatment is not soundproofing

Panels tame echo inside the room, but they do not stop sound from reaching neighbors. Blocking sound needs mass, airtight seals and decoupled walls, such as a solid door with seals, extra layers of drywall and resilient channels. Check the room modes too: a room whose length, width and height are similar or multiples of each other will have uneven bass.

Frequently asked questions

How many acoustic panels do I need?

About 9 panels of 2 × 4 ft to cover 20% of the walls in a 12 × 10 ft room with an 8 ft ceiling.

What percentage of a room should be covered with acoustic panels?

About 15 to 25% for practice rooms and 25 to 40% for home recording.

Where should acoustic panels go first?

At the first reflection points on the side walls, behind the player and in the corners for bass.

Do acoustic panels soundproof a room?

No, they reduce echo inside; blocking sound to the neighbors needs mass and airtight construction.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.