Skip to content
Omnikalc

How much does a pole barn cost?

Enter the length and width, the wall height, the finish level, the doors and the site work: get the floor area, the total cost and the cost per square foot.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

Value out of range

Value out of range

$

Value out of range

Results

Estimated total cost

$28,900

Most counties require a building permit and a setback from property lines, and wind and snow loads set the post size and truss spacing in your area
Floor area
1,200 sq ft
Total per square foot
$24.08
Doors and site work
$7,300

A pole barn, also called a post-frame building, is supported by large posts set in the ground or on piers instead of a continuous foundation, with trusses on top and metal or wood siding. It is a popular choice for garages, workshops, storage and farm buildings because it goes up fast and costs less than a conventional building. This calculator multiplies the floor area by the price per square foot of your finish level, adjusts for wall height, and adds doors and site work.

How the calculation works

  • Floor area = length × width
  • Building cost = area × price per square foot of the finish level × height factor (1.00 at 12 ft, 1.08 at 14 ft, 1.16 at 16 ft)
  • Doors = overhead doors × $1,800 + walk doors × $700
  • Total = building cost + doors + site work, permit and utility hookups

Example

A 40 ft by 30 ft building has 1,200 sq ft. As a shell with 12 ft walls at $18 a square foot, the building costs $21,600. Add two overhead doors ($3,600), one walk door ($700) and $3,000 for site work and the permit, and the total is $28,900, or about $24 per square foot. The same building insulated with a concrete floor costs about $45,700 and fully finished about $64,900.

What is included in each level

  • Shell: posts, trusses, roof, steel siding and a gravel floor. The cheapest option for storage.
  • Insulated with a concrete floor: insulated walls and roof, a poured slab and basic finishing. Suited to a workshop.
  • Finished: insulation, concrete floor, electrical service, lights, outlets and interior liner. Suited to a heated shop or a garage with living space.

What changes the price

Wider buildings need stronger trusses, and taller walls need longer posts. Snow and wind loads in your region change the specification. The site matters too: a sloped or wet site needs grading and drainage, and a long driveway or electrical run adds cost. Doing the work yourself saves labor, which is often 30% to 40% of the total, but a kit or a builder’s crew puts the building up much faster. Compare at least three written quotes that list the post size, truss spacing and siding gauge.

Rules and planning

Check zoning, setbacks and the maximum size allowed for an accessory building. Some areas limit use, for example forbidding a business or a living space in a barn. Plan the doors and the position for the electrical panel before pouring the floor, and leave room for future expansion.

Frequently asked questions

How much does a pole barn cost?

About $15 to $50 per square foot, so $18,000 to $60,000 for a 30 × 40 ft building depending on finish.

Is a pole barn cheaper than a stick-built building?

Usually yes, because the posts replace a continuous foundation.

Do I need a permit?

In most places yes; call your county before you buy.

How long does a pole barn last?

With treated posts and good drainage, 40 years or more.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.