Skip to content
Omnikalc

Resaw and bookmatch calculator

Enter the board thickness and width, the kerf and the planing allowance to get the thickness of each resawn leaf, the width of the bookmatched panel and the share of wood lost.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Final thickness of each leaf

0.656 in

Width of the bookmatched panel

13.94 in

Share of the wood lost

12.5 %

Thickness of each leaf after sawing
0.719 in
Lost to the kerf
4.2 %
Panel width to leaf thickness
21.2

The resaw and bookmatch calculator gives the final thickness of each leaf, the width of the bookmatched panel and the share of wood lost to the kerf and the planer when a thick board is resawn into two mirror-image leaves.

How the calculation works

  • Enter the board thickness and width.
  • Enter the saw kerf, the planing allowance on each sawn face and the wood lost jointing the center edge.
  • Read the leaf thickness, the panel width and the loss.

Example

Resawing a board 1.5 in thick and 7 in wide with a kerf of 0.0625 in leaves 0.719 in per leaf, which becomes 0.656 in after planing. The bookmatched panel is 13.94 in wide. The kerf takes 4.2 % of the thickness and the total loss is 12.5 %. The panel is 21.2 times as wide as a leaf is thick.

Why it matters

The calculator helps luthiers, cabinetmakers and turners who want to get two matching leaves from one thick board, know whether the thickness is enough for the panel they need, and compare the cost of buying thick stock with buying thin boards.

Good to know

Choose a board with a straight grain and let it reach equilibrium moisture before sawing. After resawing, the leaves may cup or twist, so leave extra thickness for planing, sticker the leaves and wait a few days. Joint the center edges together with the leaves still in book order so that the grain matches. A wider blade with a good tension and a sharp edge reduces drift and the allowance needed for flattening. Thin kerf blades are less stable on wide cuts.

The board feet calculator prices the lumber, the plywood sheets calculator compares sheet goods, the wood weight calculator gives the weight of a panel and the wood moisture calculator tracks drying.

Frequently asked questions

What is a bookmatch?

A bookmatch is made by resawing a thick board into two thinner leaves and opening them like the pages of a book. The two faces that were next to each other become mirror images, which gives a symmetrical figure used on guitar tops, doors, tabletops and cabinet panels.

How thick is each leaf?

Each leaf is half of the board thickness minus half of the kerf, and then planing removes more from the sawn faces. A board of 1.5 inches resawn with a 1/16-inch kerf gives leaves of about 0.72 inch, which become about 0.66 inch after planing one face by 1/16 inch.

How much wood is lost?

The kerf and the planing are lost, and the loss is larger on a thin board. A thin-kerf bandsaw blade of 1/16 inch or less keeps the waste small. The calculator gives the share of the original thickness that does not end up in the two final leaves.

What helps a good resaw?

Use a sharp bandsaw blade with few teeth per inch, a tall fence or a point-fence to correct drift, and a slow feed. Let the leaves rest for several days before planing, because internal stresses move the wood once the board is opened, and stack them with spacers to dry evenly.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.