Making sausage at home is a matter of ratios: lean meat to fat, salt, cure, water and seasoning, all weighed against the total. This calculator turns a batch weight into the grams of each ingredient, estimates the number of links from the casing size, and checks the nitrite level of a cured sausage.
How the calculation works
- Fat = batch weight × fat share; lean meat = batch weight − fat
- Salt, cure, water and spices = batch weight × their percentage
- Total batch = meat and fat + all the additions
- Weight of a link = π × (casing radius)² × link length
- Links = total batch ÷ weight of a link
- Nitrite = cure × nitrite content ÷ total batch, in parts per million
The calculation takes the density of the mixture as 1 g per cubic centimeter.
Example
A 10 lb batch is 4,536 g. With 25 % fat, weigh out 1,134 g of fat and 3,402 g of lean meat. Salt at 1.8 % is 81.6 g, Cure #1 at 0.25 % is 11.3 g, water at 10 % is 454 g and spices at 1 % are 45 g. The batch comes to 5,128 g, enough for about 42 links of 1.25 inch hog casing cut at 6 inches. The nitrite is 138 ppm, under the usual 156 ppm ingoing limit.
Why it matters
Salt and cure are small amounts that are easy to get wrong when measured by spoon, and nitrite is dangerous in excess. Weighing from percentages scales a recipe up or down without changing the taste or the safety, and gives you the numbers to repeat a batch you liked.
Good to know
Keep everything near freezing during grinding and mixing. Cure #1 is dyed pink so that it isn’t mistaken for table salt; keep it labeled and away from kitchen salt. Cooked sausage must reach a safe internal temperature. Follow a tested recipe for dried or fermented products. This tool is for education and is not a food-safety guarantee.
Related tools
The venison yield calculator estimates meat from a deer, the jerky calculator handles drying, and the brine calculator mixes a cure for whole cuts.