Skip to content
Omnikalc

How much water to add to reach your target ABV?

Enter the volume and strength of a spirit and the strength you want to get the water to add, the final volume and the proof.

Updated on
Your inputs

Value out of range

%

Value out of range

%

Value out of range

Results

Water to add (mL)

375 mL

Add the water in small steps and taste or measure with a hydrometer in between
Water to add (fl oz)
12.7 fl oz
Final volume (mL)
1,125 mL
Number of 750 mL bottles
1.5
US proof of the target
80

Cask-strength whisky, overproof rum or a homemade liqueur base is often too strong to sip. To bring it down to 40 % ABV or any other strength, you need to know how much water to add. The total amount of alcohol does not change, so the calculation is a simple proportion, and this calculator does it in milliliters and fluid ounces.

How the calculation works

Pure alcohol is conserved: volume × starting ABV = final volume × target ABV.

  • Final volume = starting volume × starting ABV ÷ target ABV
  • Water to add = final volume − starting volume = starting volume × (starting ABV ÷ target ABV − 1)
  • US proof = 2 × ABV

The calculator also shows how many standard 750 mL bottles the final volume would fill.

Example

You have 750 mL of spirit at 60 % ABV and want 40 %. The final volume is 750 × 60 ÷ 40 = 1,125 mL, so you add 375 mL of water. That is a 1:2 ratio of water to spirit. The result fills 1.5 standard bottles and is 80 proof in US terms. Diluting the same spirit to 45 % would take 250 mL of water.

Why it matters

Adding a little water to a strong spirit can open up its aroma, but too much dulls it. Working out the right amount in advance avoids the guesswork of adding water by eye, and it is useful for diluting a liqueur base, a tincture or a cleaning alcohol to a target strength as well. Always use clean water at room temperature, and stir gently.

Good to know

Alcohol and water contract slightly when they are mixed, by up to about 3.7 % in volume at around 45 % ABV, so the real strength after adding the calculated water volume is a little higher than the target. For exact work, dilute by weight or measure the result with an alcoholmeter at 20 °C and correct for temperature. Never drink or serve high-strength spirits without diluting them, and never use denatured alcohol in food or drink. This tool is for education.

The cocktail ABV calculator gives the strength of a mixed drink, the dilution calculator solves general concentration problems, and the alcohol units calculator turns a drink into standard units.

Frequently asked questions

How do I calculate how much water to add to a spirit?

The amount of pure alcohol stays the same, so volume × starting ABV = final volume × target ABV. Solve for the final volume and subtract what you started with: water = volume × (starting ABV ÷ target ABV − 1).

Why is the real strength a bit higher than calculated?

Alcohol and water contract when mixed: 1 liter of ethanol plus 1 liter of water gives about 1.93 liters. Dilution by volume therefore lands slightly above the target ABV. Measure with an alcoholmeter or hydrometer, and add water in small steps.

What is proof?

In the United States, proof is twice the ABV, so 40 % ABV is 80 proof. The old British proof was 1.75 times the ABV. Check which scale a label uses before converting.

Is it legal to dilute spirits at home?

Diluting a spirit you have bought, for example cask-strength whisky down to drinking strength, is fine. Distilling alcohol without a license is illegal in many countries. This tool does not give advice on production.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.