Skip to content
Omnikalc

Half square triangle calculator: cut size and yardage

Enter the finished size, the number of units and the method to get the cut size of the squares, the pairs to cut, the size to trim to and the fabric needed in yards.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Results

Cut size of each square

4.875 in

Pairs of squares to cut

20

Fabric needed for each color

0.500 yd

Squares of each fabric
20
Trim each unit to
4.50 in
Units produced
40

Half-square triangles are the most useful unit in patchwork, and the cutting rule is easy to forget. This half square triangle calculator gives the cut size of the squares from the finished size and the method, the number of pairs to cut, the trim size and the fabric needed in yards for each color, using the usable width of the fabric.

How the calculation works

  • Cut size = finished size + the allowance of the method: 7/8 in for two at a time, 1 in for the oversized method and 1 1/4 in for four at a time. The allowance covers two seams of 1/4 in and the diagonal.
  • Pairs of squares = units needed ÷ units per pair (2, or 4 for the four-at-a-time method), rounded up. You cut one square of each fabric for each pair.
  • Squares per row = fabric width ÷ cut size, rounded down. Rows = pairs ÷ squares per row, rounded up.
  • Fabric for each color = rows × cut size, rounded up to the next 1/8 yard (4.5 in).

Example

You need 40 half-square triangles that finish at 4 in with the two-at-a-time method on 42 in wide fabric. The squares are cut 4.875 in (4 7/8 in). You need 20 pairs, so 20 squares of each fabric. A row holds 8 squares, so 3 rows are needed, a length of 14.625 in, which is 1/2 yard for each color.

Why it matters

Cutting the squares to the right size avoids undersized units that make the blocks fit badly, and a good yardage estimate avoids a trip back to the shop for more fabric. Quilters use the calculation for scrap quilts, for kits and for planning how many squares can be cut from a fat quarter or a yard.

Good to know

Fabric is not always the full 42 in: the usable width after the selvage is cut off is often 40 to 41 in, so enter the width you really have. Buy a little extra for shrinkage and for mistakes, and consider fabric with a direction, which may need another layout. The yardage is for one color: if you use two fabrics in each unit, the amount is needed for both of them. Starch the fabric before cutting to reduce stretch on the bias edge. For scrap quilts, cut a test unit first and check that it measures the unfinished size.

The quilt size calculator plans the dimensions of the finished quilt, the isosceles triangle calculator gives sides and angles and the special right triangles calculator covers the 45-45-90 shape of the unit.

Frequently asked questions

What is a half-square triangle?

It is a quilt unit made of two right triangles sewn together along the long edge to make a square. It is the most common unit in quilt patterns, such as pinwheels, flying geese variations and many star blocks.

Why add 7/8 inch to the finished size?

A seam allowance of 1/4 in is lost on each side, which is 1/2 in, and the diagonal seam adds about 3/8 in because it runs at 45 degrees. The sum is 7/8 in. That is why a 4 in finished unit is cut from 4 7/8 in squares.

What is the oversized method for?

You cut the squares 1 in larger than the finished size, sew and cut them in two, then trim each unit to the unfinished size, which is the finished size plus 1/2 in. It costs a little more fabric and gives the most accurate units.

How does the four-at-a-time method work?

Two squares of different fabrics are sewn all around on a 1/4 in seam, then cut twice on the diagonals to give four units. The squares are cut 1 1/4 in larger than the finished size, and each of them is trimmed afterwards.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.