This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional.
An electric fireplace has two parts: a heater, usually around 1,400 to 1,500 W, and an LED flame effect that uses very little. Many people run the flames alone for ambiance and switch the heat on when needed. This calculator estimates the energy and cost per season and separates the cost of heat from the cost of the flame effect.
How the calculation works
- Heat energy = heater power × hours with heat × days
- Flame energy = flame power × hours of flames only × days
- Season cost = (heat + flame energy) × electricity price
- Cost of an hour of heat = heater power × price
A 1,400 W electric fireplace heating 4 hours a day, with 3 more hours of flame effect alone at 50 W, uses about 690 kWh over 120 days. At $0.17 a kWh, the season costs $117.30. An hour of heat costs about $0.24, while the flame effect alone costs only $3.06 for the season.
Typical power
| Mode | Power |
|---|---|
| Flame effect only (LED) | 10 to 50 W |
| Low heat setting | about 750 W |
| High heat setting | 1,400 to 1,500 W |
Is it an efficient heater?
An electric fireplace turns all its electricity into heat at the point of use, so no heat is lost up a chimney. But resistance heat costs more per unit of heat than a heat pump, and often more than gas. It makes most sense for zone heating: warming the room you are in while keeping the thermostat lower elsewhere.
Saving money
- Use the thermostat or low setting rather than full power.
- Close the door of the room you are heating.
- Run the flame effect alone when you only want the look.
- Turn the fireplace off when you leave the room; a timer helps.
Safety
Plug the unit directly into a wall outlet, not an extension cord or power strip, keep curtains and furniture clear of the heater outlet and follow the manufacturer’s clearances.