Skip to content
Omnikalc

How much electricity does a garage door opener use?

Enter the standby power, the motor power, the seconds per opening or closing, the openings and closings a day, the light power and how long it stays on, your electricity price, the installed price and the years you keep it: get the energy per year, the standby share, the yearly cost and the lifetime cost.

Updated on
Your inputs
W

Value out of range

W

Value out of range

s

Value out of range

Value out of range

W

Value out of range

min

Value out of range

$

Value out of range

$

Value out of range

years

Value out of range

Results

Cost per year

$8.50

Lifetime cost, install included

$552

Standby draw is most of the bill, so compare it when you buy; LED lighting with a short timer and a battery backup that meets your local code keep running costs low
Energy per year
50 kWh
Share used on standby
88 %

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional.

A garage door opener only works for a few seconds at a time, so many people assume it costs almost nothing to run. In fact the standby power it uses around the clock, to listen for the remote and keep its sensors on, usually makes up most of its electricity use. This calculator separates standby, motor and light, and gives the yearly and lifetime cost.

How the calculation works

  • Standby energy per day = standby power × 24 hours
  • Motor energy per day = motor power × seconds per move ÷ 3600 × moves a day
  • Light energy per day = light power × minutes on per move ÷ 60 × moves a day
  • Energy per year = daily total × 365 ÷ 1000
  • Lifetime cost = installed price + yearly cost × years you keep it

An opener with 5 W of standby, a 400 W motor running 12 seconds per move, 6 moves a day and a 20 W LED light on 4.5 minutes each time uses about 50 kWh a year, with 88% of it on standby. At $0.17 a kWh that is about $8.50 a year. Installed for $450 and kept 12 years, it costs about $552 in all.

Typical values

Item Typical value
Standby power 2 to 8 W, more with Wi-Fi and cameras
Motor power ½ hp chain or belt drive, about 350 to 500 W
Time per move 10 to 15 seconds
Light timer 4 to 5 minutes
Lifespan 10 to 15 years

Older models with incandescent bulbs of 60 to 100 W can use more for lighting than for the motor. Switching to LED bulbs rated for openers cuts that part by about 80%.

Choosing an opener

  • Belt drives are quieter, chain drives cheaper, and wall-mounted jackshaft units save ceiling space.
  • Battery backup lets you open the door during a power cut, and some areas require it.
  • Smart features add convenience but often add a few watts of standby.
  • Test the auto-reverse safety feature every month with a roll of paper towels under the door.

At these small amounts, the purchase and installation dominate the lifetime cost; pick for reliability and safety, then check the standby rating.

Frequently asked questions

How much electricity does a garage door opener use?

About 50 kWh a year with 5 W of standby and 6 moves a day.

How much does a garage door opener cost to run?

About $8.50 a year at $0.17 a kWh.

Does a garage door opener use power when not in use?

Yes: standby makes up about 88% of the use in this example.

What is the lifetime cost of a garage door opener?

About $552 over 12 years with a $450 install.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.