Skip to content
Omnikalc

Omega ratio calculator

Enter six period returns and a minimum acceptable return to get the Omega ratio, the upside and downside sums and the share of periods above the threshold.

Updated on
Your inputs
%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

Results

Omega ratio

1.500

Average gain above the threshold
1.800 %
Average shortfall below the threshold
1.200 %
Mean return
1.600 %
Periods above the threshold
67 %
Reading (0 below 1 loses, 1 from 1 gains, 2 from 1.5 strong)
2

The Omega ratio calculator gives the Omega ratio, the average gain above the threshold, the average shortfall below it, the mean return, the share of periods above the threshold and a reading of the result, from six period returns.

How the calculation works

  • Enter the return of each of the six periods, in percent.
  • Enter the threshold, your minimum acceptable return for one period.
  • Read the Omega ratio and compare it with 1.

Example

With a threshold of 1 %, the average gain above it is 1.800 % and the average shortfall below it 1.200 %, so the Omega ratio is 1.500, reading 2. The mean return is 1.600 %, and 67 % of the periods end above the threshold.

Why it matters

The calculator helps investors, analysts and finance students who compare funds, strategies or track records and want a measure that uses the whole shape of the returns, including the asymmetry and the fat tails that a mean and a standard deviation hide.

Good to know

Use returns for equal periods, in percent, and a threshold for the same period length: a monthly threshold of 1 percent is not an annual one. The ratio is very high or infinite when there is no shortfall, so the calculator caps it at 1,000. With only six data points, the result is an illustration and not a statistic. The Omega ratio depends on the threshold, so test several values, and remember that past returns do not guarantee future results. A ratio computed on a short history can also look better or worse than the true long-run value.

The Sharpe ratio calculator measures return per unit of total risk, the Sortino ratio calculator uses only the downside deviation, the CAGR calculator turns returns into a growth rate and the standard deviation calculator gives the volatility of the returns.

Frequently asked questions

What is the Omega ratio?

The Omega ratio, introduced by Keating and Shadwick, compares the gains above a threshold with the losses below it. It is the sum of the returns above the threshold divided by the sum of the shortfalls below it. A value above 1 means that the gains outweigh the losses relative to the chosen threshold.

Why use it instead of the Sharpe ratio?

The Sharpe ratio uses only the mean and the standard deviation, so it ignores skewness and fat tails. The Omega ratio uses the whole distribution of returns, since it weighs every gain and every shortfall, and it does not assume that the returns are normal. Two funds with the same Sharpe ratio can have very different Omega ratios.

How should the threshold be chosen?

The threshold is the minimum acceptable return for the investor, such as zero, the risk-free rate, an inflation target or a benchmark return, measured over the same period as the returns. The ratio changes with the threshold, so a complete analysis plots Omega against a range of thresholds.

How many periods are needed?

Six periods are enough to understand the formula but far too few to judge a manager. Use at least 36 monthly returns, and preferably 60 or more, to get a stable estimate. With few data points, a single large gain or loss can swing the ratio a lot.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.