Skip to content
Omnikalc

What size birdhouse and entrance hole for each bird?

Choose the bird, the number of boxes and the board thickness: get the inside floor, the depth, the entrance hole diameter and height, the mounting height, the board width and the length of board to buy.

Updated on
Your inputs

Value out of range

in

Value out of range

Results

Entrance hole diameter

1.5 in

Board length to buy

9.1 ft

Use untreated wood, skip the perch, drill drainage and vent holes, hinge one side for cleaning and face the hole away from prevailing wind
Inside floor (square)
5 in
Depth from floor to roof
9 in
Hole height above the floor
7 in
Mounting height
5 ft
Board width needed
6.5 in

A birdhouse only attracts the bird you want when the inside floor, the depth and above all the entrance hole match that species. A hole a fraction of an inch too big lets in house sparrows and starlings, which take over boxes meant for native cavity nesters. This calculator gives the usual dimensions for common backyard birds and works out how much board you need to build the boxes.

How the calculation works

  • Floor, depth, hole and mounting height come from a table of common recommendations for each species
  • Board width = inside floor + 2 × board thickness
  • Board length per box = 4 × depth (two sides, front, back) + 4 in of extra back for mounting + 2 × floor (floor and roof) + 2 × thickness + 3 in of roof overhang

An eastern bluebird box has a 5 × 5 in floor, 9 in from floor to roof and a 1.5 in hole about 7 in above the floor, mounted around 5 ft high. Two boxes from 3/4 in boards need a board at least 6.5 in wide and about 9.1 ft long, so a 1 × 8 board (7.25 in actual width) trimmed to size works well.

Common dimensions

Bird Floor Hole Mounting height
House wren 4 × 4 in 1 1/8 in about 6 ft
Chickadee 4 × 4 in 1 1/8 in about 6 ft
Eastern bluebird 5 × 5 in 1 1/2 in about 5 ft
Tree swallow 5 × 5 in 1 1/2 in about 6 ft
White-breasted nuthatch 4 × 4 in 1 1/4 in about 12 ft
Downy woodpecker 4 × 4 in 1 1/4 in about 10 ft

Recommendations vary a little between sources and regions, so treat these as starting points and check what nests near you.

Building tips

  • Use untreated cedar, pine or exterior plywood about 3/4 in thick, and leave the outside unpainted or use a light, water-based finish.
  • Skip the perch: native birds do not need it and it helps predators.
  • Drill drainage holes in the floor corners and leave vent gaps under the roof.
  • Make one side or the roof open for cleaning, and scrape out old nests after the season.
  • Roughen or groove the inside of the front so fledglings can climb out.

Placement

Face the hole away from prevailing winds and strong afternoon sun. Mount boxes on a pole with a baffle rather than on a fence that cats and raccoons can climb, and space boxes for territorial species such as bluebirds well apart.

Frequently asked questions

What size hole for a bluebird house?

1.5 in across, about 7 in above a 5 × 5 in floor.

What size hole keeps out house sparrows?

A 1 1/8 in hole, used for wrens and chickadees, is too small for house sparrows.

Should a birdhouse have a perch?

No. Native cavity nesters do not need one, and a perch helps predators and sparrows.

How much board for two bluebird houses?

About 9.1 ft of board at least 6.5 in wide, using 3/4 in lumber.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.