Skip to content
Omnikalc

How big should a chicken tractor be?

Enter the hens, the floor area each, the width and the height of the tractor: get the floor area, the length, the wire mesh for the sides and top, the frame lumber and the grass the hens graze in a month if you move it daily.

Updated on
Your inputs

Value out of range

sq ft

Value out of range

ft

Value out of range

ft

Value out of range

Results

Floor area

32 sq ft

Length

8.0 ft

Wire mesh for sides and top
104 sq ft
Frame lumber
60.0 ft
Grass grazed per month, moved daily
974 sq ft
Use hardware cloth rather than chicken wire against raccoons and dogs, add a covered nest and roost corner, and move it to fresh grass every day or two

A chicken tractor is a bottomless, movable coop that you drag to fresh grass every day or two. The hens get new forage and bugs, the lawn gets fertilized and scratched over, and parasites build up less than in a fixed run. This calculator sizes the tractor and works out the wire mesh, the frame lumber and the grass it covers in a month.

How the calculation works

  • Floor area = hens × floor area per hen
  • Length = floor area ÷ width
  • Wire mesh = 2 × (length + width) × height for the sides, + length × width for the top
  • Frame lumber = 4 × (length + width) for the bottom and top rails, + 4 × height for the corner posts
  • Grass per month = floor area × 30.44 days if you move it every day

Four hens at 8 sq ft each need a 32 sq ft tractor, 8 ft long if it is 4 ft wide. At 3 ft high it takes about 104 sq ft of wire mesh and 60 ft of frame lumber. Moved daily, it covers about 974 sq ft of grass a month.

Space per hen

Use Floor per hen
Bantams 4 to 6 sq ft
Standard hens moved daily 6 to 10 sq ft
Standard hens moved less often 10 sq ft or more

The tractor is the whole living space for the day, so do not go too small. A tractor that is too large, though, becomes heavy and hard to move on rough ground.

Weight and wheels

A light tractor is one you will actually move. Use thin lumber or electrical conduit for the frame, add two wheels at one end and a handle at the other, and keep it short enough to pull through gates. Triangle or A-frame designs are light and shed rain, but give less headroom.

Protection from predators

Raccoons, foxes and dogs can reach through or tear chicken wire. Use 1/2 in hardware cloth on the lower part at least, and make sure the bottom frame sits flat on the ground, with a wire apron or skirt if predators dig. Many keepers lock the hens in a closed coop at night and use the tractor only in the daytime.

Nest box, roost and shade

Add a covered end with a nest box and a roost bar, plus solid roof panels for shade and rain. Give water and feed in hanging containers so they do not tip when you move the tractor. Move it gently, watching for feet, and avoid freshly sprayed or treated lawns. Check local rules on keeping hens, as some towns limit the number of birds or ban roosters.

Frequently asked questions

How big a chicken tractor for 4 hens?

At 8 sq ft each, 32 sq ft, for example 8 ft long and 4 ft wide.

How much wire mesh for a chicken tractor?

An 8 × 4 ft tractor 3 ft high takes about 104 sq ft for the sides and top.

How often should I move a chicken tractor?

Every day or two, so the hens get fresh grass and the lawn recovers; moved daily it covers about 974 sq ft a month.

Is chicken wire enough for a chicken tractor?

Use 1/2 in hardware cloth at least on the lower part, as raccoons and dogs can tear chicken wire.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.