This calculator is for general information and education. It is not medical advice and does not replace the advice of your doctor or a registered dietitian.
How much you breathe is not the same as how much gas exchange you get. This minute ventilation calculator takes the respiratory rate, tidal volume and dead space to show the minute ventilation, the alveolar ventilation, the dead space ventilation and fraction and, with your CO2 production, the estimated arterial PaCO2.
How the calculation works
- Minute ventilation = respiratory rate × tidal volume.
- Alveolar ventilation = respiratory rate × (tidal volume − dead space volume).
- Dead space fraction = dead space volume ÷ tidal volume.
- Estimated PaCO2 = 0.863 × CO2 production ÷ alveolar ventilation, with CO2 production in mL/min and ventilation in L/min.
- Dead space ventilation = respiratory rate × dead space volume.
Example
An adult breathes 14 times a minute with a tidal volume of 500 mL and a dead space of 150 mL. Minute ventilation is 7.0 L/min, but only 4.9 L/min reaches the alveoli. The dead space fraction is 30 %, and with a CO2 production of 200 mL/min the estimated PaCO2 is 35.2 mmHg, at the low end of the normal range.
Why it matters
Doctors, nurses and respiratory therapists adjust ventilator settings and judge breathing by these numbers. Two patients with the same minute ventilation can have very different alveolar ventilation if one breathes fast and shallow. The relation between alveolar ventilation and PaCO2 is also the basis of acid-base reasoning, and of why changing the rate or the tidal volume on a ventilator moves the CO2.
Good to know
Dead space is about 2.2 mL per kilogram of ideal body weight, roughly 150 mL for an adult, and it rises with a face mask, tubing, lung disease or a high rate of positive pressure. The PaCO2 formula assumes a steady state and a typical CO2 production of about 3 mL per kilogram per minute at rest, which rises with fever, exercise, sepsis and overfeeding. The result is an estimate and measured blood gases are the reference. Use the tidal volume per kilogram of predicted body weight to judge whether a ventilator volume is protective, not the absolute number.
Related tools
The tidal volume calculator sets volumes per predicted body weight, the dead space calculator uses the Bohr equation to measure the dead space fraction, and the respiratory compliance calculator measures lung stiffness.