Skip to content
Omnikalc

Pandolf load carriage energy calculator

Enter the body weight, the load carried, the walking speed, the grade and the terrain to get the metabolic rate in watts, the calories per hour and the energy of the whole march.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs
lb

Value out of range

lb

Value out of range

mph

Value out of range

%

Value out of range

mi

Value out of range

Results

Metabolic rate

592 W

Energy per hour

509 kcal/h

Energy of the whole march

1,698 kcal

Metabolic rate per kilogram of body weight
7.91 W/kg
Load as a share of body weight
24.2 %
Duration of the march
3.33 h
Metabolic rate without the load
490 W

The Pandolf load carriage energy calculator gives the metabolic rate of a person walking with a pack, in watts and in calories per hour, from the body weight, the load, the speed, the grade and the terrain, and the energy of a whole march.

How the calculation works

  • Enter your body weight and the load carried.
  • Enter the walking speed, the grade and choose the terrain.
  • Enter the distance and read the metabolic rate and the energy.

Example

Walking at 3 mph with 40 lb on the back, a load of 24.2 % of body weight, on a grade of 5 % costs 592 W, which is 509 kcal/h or 7.91 W/kg. Without the pack it would be 490 W. A march of 10 mi takes 3.33 h and burns 1,698 kcal.

Why it matters

The calculator helps hikers, soldiers, mountaineers and trip planners who want to estimate how many calories a day with a pack costs, compare the effect of a lighter pack or a steeper route, and plan food and water for a long trek.

Good to know

The equation is valid for a person walking at a steady pace on a grade of at least zero, and it overestimates the cost of a long downhill. Add the weight of the pack, water and food to the load. The terrain factor is a guide, and snow or mud can make the walk even harder. The result depends strongly on the speed, and so a slower pace saves a large share of the energy. This estimate is not a medical recommendation.

The hiking water calculator plans the water, the backpack weight calculator sets the load, the hiking time calculator estimates the duration and the dog hiking pack calculator sizes a pack for a dog.

Frequently asked questions

What is the Pandolf equation?

The Pandolf equation estimates the metabolic rate of a person walking with a load. It adds a standing cost of 1.5 W per kilogram of body weight, a load term that grows with the square of the load to body weight ratio, and a walking term that depends on the speed, the grade and a terrain factor. It was developed in 1977 from treadmill tests and is widely used in military and outdoor research.

What are the units?

The equation takes the weights in kilograms, the speed in meters per second and the grade in percent, and gives the metabolic rate in watts. One watt is 0.86 kilocalorie per hour. A resting adult uses about 70 to 100 W, while hiking with a pack often costs 400 to 600 W.

How does terrain change the cost?

The terrain factor multiplies the walking term: 1.0 for pavement, 1.1 for a dirt road, 1.2 for light brush, 1.5 for heavy brush, 1.8 for a bog and 2.1 for loose sand. Heavy ground can double the energy cost compared with a paved road at the same speed and load.

How accurate is it?

The equation was validated for healthy young adults, at speeds of about 0.5 to 2 m/s and moderate loads. It overestimates for downhill walking and for light loads on experienced hikers. Use it to compare conditions and to plan food, not as a precise measurement of the energy of a person.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.