Skip to content
Omnikalc

How big is your ellipse?

Enter the two semi-axes: get the area, the perimeter, the eccentricity, the distance to the foci and the latus rectum.

Updated on
Your inputs

Value out of range

Value out of range

Results

Area

47.124

Perimeter (Ramanujan approximation)

25.527

Eccentricity
0.8000
A strongly elongated ellipse
Distance from the center to each focus
4.000
Distance between the two foci
8.000
Latus rectum (chord through a focus)
3.600

An ellipse is the oval you get by stretching a circle, or by slicing a cylinder at an angle. It is described by two numbers: the semi-major axis and the semi-minor axis, which are half of its longest and shortest diameters. This calculator turns them into the area, the perimeter, the eccentricity and the position of the foci, which you need for garden beds, tabletops, orbits, mirrors and lenses.

How the calculation works

  • Area = π × a × b
  • Perimeter ≈ π × (a + b) × (1 + 3h ÷ (10 + √(4 − 3h))), where h = ((a − b) ÷ (a + b))², which is Ramanujan’s second approximation
  • Eccentricity = √(1 − (short axis ÷ long axis)²)
  • Distance from the center to a focus = √(long² − short²)
  • Latus rectum = 2 × short² ÷ long

Example

An oval tabletop has a semi-axis a = 5 and a semi-axis b = 3 (in any unit, for example feet). Its area is 47.124 square units, and its perimeter is about 25.527 units. The eccentricity is 0.8, each focus lies 4 units from the center, so the two foci are 8 units apart. The chord through a focus, at a right angle to the long axis, measures 3.6 units.

Where ellipses show up

Planets move on ellipses with the sun at one focus, so the eccentricity measures how stretched an orbit is. Whispering galleries and some lamp reflectors use the focus property: a sound or light ray leaving one focus passes through the other. Builders use ellipses for arches, flower beds and oval windows, and the perimeter tells you how much edging, trim or fabric to buy.

Good to know

The perimeter is not simply π times the sum of the axes: that shortcut underestimates it for flat ellipses. If you only know the full length and width, divide each by two before entering them. For a circle, set both values to the radius. To draw an ellipse on the ground with a string, pin the two ends at the foci and keep the string tight, with its length equal to the long axis.

For a flattened circle that has a flat edge, see the circular segment, and for the three-dimensional version, the ellipsoid calculator gives the volume. For other flat shapes, the area and perimeter calculator covers rectangles, trapezoids and rings.

Frequently asked questions

Is there an exact formula for the perimeter of an ellipse?

Not in elementary terms. The exact value needs an elliptic integral. Ramanujan's formula used here is accurate to a tiny fraction of a percent for any realistic shape.

What is the eccentricity of an ellipse?

A number from 0 to 1 that says how flattened the ellipse is. A circle has an eccentricity of 0, and the value approaches 1 as the ellipse gets longer and thinner.

What are the foci?

Two points on the long axis. For any point on the ellipse, the distances to the two foci add up to the same constant, equal to the length of the long axis.

What if both semi-axes are equal?

Then the ellipse is a circle: the eccentricity is 0, both foci sit at the center, and the area is pi times the radius squared.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.