Skip to content
Omnikalc

Reuleaux triangle calculator: area and perimeter from the width

Enter the width of the Reuleaux triangle to get its area, its perimeter, the inner triangle, a circular segment and the circumscribed radius.

Updated on
Your inputs

Value out of range

Results

Area

70.477 in²

Perimeter
31.416 in
Area of the inner equilateral triangle
43.301 in²
Area of one circular segment
9.059 in²
Radius of the circle through the corners
5.774 in
Area as a share of a circle of the same width
89.73%

Not every shape with a constant width is a circle. This Reuleaux triangle calculator takes the width of the shape and gives its area, its perimeter, the area of the inner equilateral triangle, the area of one circular segment, the circumscribed radius and the share of a circle of the same width.

How the calculation works

  • Area = (π − √3) ÷ 2 × w², where w is the width. The shape is an equilateral triangle of side w plus three circular segments, each cut by an arc of radius w.
  • Perimeter = π × w, the same as a circle of diameter w, which is what makes the shape a curve of constant width.
  • Inner triangle = √3 ÷ 4 × w², and one segment = (area − inner triangle) ÷ 3.
  • Circumscribed radius = w ÷ √3, the radius of the circle through the three corners. The share of a circle of the same width is (π − √3) ÷ 2 ÷ (π ÷ 4), about 89.7%.

Example

A Reuleaux triangle of width 10 in has an area of (3.1416 − 1.7321) ÷ 2 × 100 = 70.48 in² and a perimeter of π × 10 = 31.42 in. The inner equilateral triangle has an area of 43.30 in², so each of the three segments has (70.48 − 43.30) ÷ 3 = 9.06 in². The corners lie on a circle of radius 10 ÷ 1.732 = 5.77 in, and the shape fills 89.7% of a circle of the same width.

Why it matters

Engineers and designers use the shape for parts that must roll or turn between parallel surfaces, and mathematicians use it as the standard example of a curve of constant width. It also makes a good geometry exercise on segments, sectors and the area of curved figures.

Good to know

The calculator assumes a true Reuleaux triangle, made of three arcs with radius equal to the width. Generalized shapes with more sides, such as the Reuleaux pentagon, have different formulas. The values are for the flat outline, and any thickness of the part, tolerances and the rounding of real corners are not considered.

The regular polygon calculator gives the geometry of the equilateral triangle inside, and the circle calculator covers the circle of the same width.

Frequently asked questions

What is a Reuleaux triangle?

A Reuleaux triangle is the shape formed by three circular arcs, each centered on the opposite corner of an equilateral triangle and joining the other two corners. It looks like a rounded triangle. It is the simplest curve of constant width after the circle.

What does constant width mean?

A curve of constant width has the same distance between every pair of parallel supporting lines, in every direction. A Reuleaux triangle rolls between two parallel plates without changing their distance, like a circle, even though its center does not stay in place. This is why it has the same perimeter as a circle of equal width.

What are its uses?

The shape is used for guitar picks, for cam profiles, for the drill bits that cut nearly square holes, for some engine designs and for coin shapes such as the 50 pence coin in the United Kingdom, which has seven sides and the same constant-width property. Manhole covers are sometimes designed with it, so that they cannot fall through.

Why is its area smaller than the circle's?

By the Blaschke–Lebesgue theorem, the Reuleaux triangle has the smallest area of all curves of constant width, and the circle has the largest. Both have a perimeter of π times the width, but the triangle's area is only about 90% of the circle's.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.