Skip to content
Omnikalc

How precise is your sample estimate?

Enter the standard deviation, sample size, a sample proportion and optionally the population size: get the standard error of the mean and of the proportion, the 95% margins and the sample needed to halve them.

Updated on
Your inputs

Value out of range

Value out of range

%

Value out of range

Value out of range

Results

Standard error of the mean

1.500

Standard error of the proportion (percentage points)

4.90

95% margin of error for the mean
2.940
95% margin of error for the proportion (percentage points)
9.60
Sample size to halve the error
400

The standard error tells you how precisely a sample estimates the thing you care about. If you drew many samples from the same population, their means would vary from sample to sample, and the standard error is the standard deviation of that variation. It is the basis for confidence intervals and for significance tests. This calculator gives the standard error of a mean and of a proportion, with the margin of error at 95% confidence.

How the calculation works

  • Standard error of the mean = standard deviation ÷ √n
  • Standard error of a proportion = √(p × (1 − p) ÷ n)
  • 95% margin of error = 1.96 × standard error
  • Finite population correction = √((N − n) ÷ (N − 1)), applied when you give a population size

The proportion is shown in percentage points, so 4.9 means 4.9 points on a percentage scale.

Example

A sample of 100 with a standard deviation of 15 gives a standard error of the mean of 15 ÷ 10 = 1.5, and a 95% margin of error of about ±2.94. For a proportion of 40% in the same sample, the standard error is √(0.4 × 0.6 ÷ 100) = 4.9 points, with a margin of about ±9.6 points. To halve these errors, you would need 400 observations.

Why sample size matters

The standard error shrinks with the square root of the sample size. Going from 100 to 400 people halves the error, but going from 400 to 1,600 is needed to halve it again. That is why very large samples bring diminishing returns, and why a survey of about 1,000 people is often a good compromise.

Standard error or standard deviation?

Report the standard deviation to describe how variable individuals are, and the standard error (or a confidence interval) to describe how precise your estimate of the mean is. Do not use one in place of the other. The standard error accounts for random sampling variation only; it does not capture bias from a poorly chosen sample or from measurement errors.

Frequently asked questions

What is the standard error?

The standard deviation of an estimate such as the sample mean: how much it would vary from one sample to another.

How is it different from the standard deviation?

The standard deviation describes the spread of the data. The standard error describes the uncertainty of a statistic and shrinks as the sample grows.

Why does the error fall slowly with sample size?

It is proportional to 1 ÷ √n, so you need four times the sample to halve it.

What is the finite population correction?

A factor √((N − n) ÷ (N − 1)) that reduces the error when the sample is a large share of a small population.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.