Skip to content
Omnikalc

What size cat flap does your cat need, and how high should it go?

Enter your cat's width across the shoulders or belly, its body depth from back to belly, the height of its belly off the floor, the door or wall thickness and the depth of the flap's own tunnel: get the opening width and height, the bottom and top of the opening and the tunnel extension.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Opening width

7.0 in

Opening height

8.0 in

Bottom of the opening above the floor
4.0 in
Top of the opening above the floor
12.0 in
Tunnel extension needed
0.00 in
Check the maker's opening size, not the outer frame, and avoid fitting it in a fire door or a glass door unless the glass is cut for it by a glazier; a microchip flap keeps neighbors' cats out

A cat flap lets your cat come and go without you opening the door, but a flap that is too small, or set too high, puts a cat off using it. This calculator turns a few measurements of your cat into the opening size and the height to fit it at, and checks whether the door or wall is deeper than the flap’s tunnel.

How the calculation works

  • Opening width = the cat’s widest point (shoulders or belly) + 2 in
  • Opening height = body depth from back to belly + 2 in
  • Bottom of the opening = the height of the cat’s belly off the floor
  • Top of the opening = bottom + opening height
  • Tunnel extension = door or wall thickness − the flap’s own tunnel depth, if positive

A cat 5 in wide and 6 in deep, with its belly 4 in off the floor, needs an opening about 7 in wide and 8 in tall. Set the bottom 4 in up, so the top is at 12 in. A standard 1.75 in door is thinner than the flap’s 2 in tunnel, so it needs 0 in of extension.

How to measure your cat

  1. Width: measure across the widest part of the body, usually the shoulders or, in a big cat, the belly.
  2. Depth: measure from the top of the back to the bottom of the belly while the cat stands.
  3. Belly height: measure from the floor to the lowest point of the belly.

A cat steps over the bottom edge of the flap, so it should sit at about belly height. Too high, and the cat has to jump; too low, and it may struggle on a thick door.

Typical flap sizes

Flap Opening (approx.) For
Standard 5.5 × 6.5 in most cats up to about 15 lb
Large cat 6.5 × 8 in Maine Coons, large or heavy cats
Small dog door 7 × 10 in or more very large cats, small dogs

Always compare the maker’s opening size, not the outer frame.

Fitting tips

  • A microchip flap opens only for your cat’s chip and keeps neighbors’ cats and wildlife out.
  • Do not cut into a fire door, and have a glazier cut glass panels; a wall install needs a tunnel liner and care around wires and pipes.
  • Choose a flap with a 4-way lock so you can set it to in-only at night.
  • Teach your cat by propping the flap open and rewarding it with treats on the other side.

Frequently asked questions

What size cat flap do I need?

Your cat's widest point plus 2 in by its depth plus 2 in, about 7 × 8 in for an average cat.

How high should a cat flap be off the floor?

With the bottom at about the cat's belly height, often around 4 in.

Do I need a tunnel extension for my cat flap?

Only if the door or wall is thicker than the flap's own tunnel, often about 2 in.

What cat flap for a Maine Coon?

A large-cat flap with an opening of about 6.5 × 8 in or more.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.