Skip to content
Omnikalc

What size collar and harness does my dog need?

Measure your dog's neck and chest to find the collar length, the adjustable range to look for and the harness girth, with room for two fingers.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

Results

Collar length

16.0 in

Check the fit: two fingers should slide under the collar, but it should not slip over the ears

Harness chest girth

26.0 in

Adjustable collar: smallest setting needed
14.0 in
Adjustable collar: largest setting needed
18.0 in

A well-fitting collar or harness is comfortable and safe: too tight and it rubs or restricts breathing, too loose and your dog can slip out. This calculator turns two measurements into a collar length, the adjustable range to look for and a harness size.

How to measure your dog

  1. Neck: with a soft tape measure, measure around the neck where the collar sits, usually just below the head. Keep the tape snug but not tight.
  2. Chest girth: measure around the widest part of the chest, just behind the front legs. This is the key size for most harnesses.

If you only have a string, wrap it around your dog, mark it and measure the string with a ruler.

How the calculation works

  • Collar length: neck size plus about two fingers of room, 2 in by default. A 14 in neck gives a collar of about 16 in.
  • Adjustable range: an adjustable collar should cover from the neck size up to the neck size plus twice the room, here about 14 to 18 in, so the right setting falls in the middle of the range.
  • Harness girth: chest girth plus about 2 in, here 26 in for a 24 in chest. Check the maker’s chart, since harness sizes vary by brand and style.

For very small dogs, about 1 in of room is often enough; for large, thick-necked dogs, a little more may be needed.

The two-finger test

Once the collar is on, you should be able to slide two fingers flat under it. It should not slip over the ears when you pull it gently forward. Check the fit regularly, especially for growing puppies, which may need a new collar every few weeks, and after a change in weight or coat.

Collar or harness?

  • Collars carry ID tags and are fine for walking dogs that do not pull.
  • Harnesses spread the pressure across the chest and are often better for dogs that pull, small breeds with delicate necks, and short-nosed breeds that can have breathing problems.
  • Front-clip harnesses can help reduce pulling.

Safety tips

  • Remove collars in a crate or during unsupervised play, where they can catch.
  • Breakaway collars are often used for cats and some dogs to reduce the risk of strangling if caught.
  • Keep ID information up to date on tags and on any microchip registration.
  • Check the skin under the collar now and then for rubbing or irritation.

Frequently asked questions

How do I measure my dog for a collar?

Measure around the neck where the collar sits, then add about 2 in, or two fingers.

How tight should a dog collar be?

Two fingers should slide under it, but it should not slip over the ears.

How do I measure my dog for a harness?

Measure the chest girth just behind the front legs and check the maker's size chart.

Is a harness better than a collar?

Often for dogs that pull, small breeds and short-nosed breeds; a collar still carries ID tags.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.