An outdoor dog run gives a dog a safe, enclosed space when you cannot supervise it. It should be big enough to move, turn and play comfortably. This calculator sizes a run from your dog’s body length and the number of dogs, and gives the area and fencing length.
How the calculation works
Measure your dog from the tip of the nose to the base of the tail. The calculator uses simple multiples of that length:
- Run length = dog’s length × length multiple
- Run width = dog’s length × width multiple
- Extra dogs add a share of the length for each additional dog
For a dog 30 in long, a run 4 times its length and 2 times its length in width measures 120 in by 60 in, that is 10 ft by 5 ft. That is 50 sq ft, with 30 ft of fencing around it.
With two dogs and 50% extra length per additional dog, the run becomes 15 ft long.
Choosing the multiples
These multiples are a rule of thumb, not a standard. Larger values give more room to move:
- A resting area next to a house or garage can be modest.
- A run where the dog spends hours should be larger, ideally with room to trot.
- Active, young or large dogs need more space than calm, small or older dogs.
Local rules on keeping dogs, if any, take precedence over any rule of thumb.
Building a good run
- Fence height: high enough that the dog cannot jump out; many builders use 5 to 6 ft for medium and large dogs.
- Digging: bury wire mesh along the base or lay a concrete or paver edge for dogs that dig.
- Ground: gravel, pavers or artificial turf drain and clean more easily than bare soil, which turns to mud.
- Shade and shelter: a roof over part of the run, a dog house and fresh water are essential.
- Gate: a gate wide enough for you to enter and clean, with a secure latch.
A run is not a substitute for exercise
Even a large run does not replace walks, play and time with people. Dogs left alone for long periods can become bored, bark or dig. Use the run as a safe place for short periods, and give your dog daily walks and activity suited to its age and breed.