How much solar power reaches the ground at a given time and place? This calculator uses the Haurwitz clear-sky model, a simple formula that depends only on the height of the sun. It gives the global horizontal irradiance (GHI) in watts per square metre, corrects it for cloud cover with the Kasten-Czeplak relation and converts it into the power of a solar panel area. It is a quick way to estimate the shape of a solar day without weather data.
How the calculation works
- Solar declination δ = 23.45° × sin(360° × (284 + day) ÷ 365)
- Hour angle h = 15° × (solar time − 12)
- Cosine of the zenith angle cos Z = sin φ sin δ + cos φ cos δ cos h
- Clear-sky GHI = 1098 × cos Z × e^(−0.059 ÷ cos Z) W/m², when the sun is above the horizon
- With clouds GHI × (1 − 0.75 × (cloud fraction)^3.4)
- Panel power = GHI × area × efficiency
Example
At 45° N on day 172 (June 21st) at 10:00 solar time, the declination is 23.4° and the sun is 57.5° above the horizon. The clear-sky irradiance is 863 W/m². With 25 % cloud, it is 857 W/m². A 10 m² array of 20 % panels laid flat delivers 1,715 W. At solar noon the same day, the clear-sky value rises to 958 W/m².
Why it matters
Knowing the irradiance lets you size a solar array, check an inverter, or compare the output of a day with the theoretical maximum. The 1,000 W/m² of the standard test conditions for panels is close to the clear-sky value at a high sun, which explains why panel ratings are given at this level. The tool shows how the output drops in winter and in the morning or evening, when the sun is low.
Good to know
The Haurwitz model is a coarse one: it ignores altitude, humidity, aerosols and the ozone layer, and it gives the total on a horizontal plane, not on a tilted panel. A panel facing the sun receives more than a flat one, especially in winter. The cloud correction is an average, since thin cirrus and thick clouds behave differently. The declination formula is accurate to about a degree. Use local solar time, not clock time; the two differ by the longitude offset, the equation of time and daylight saving time.
In practice
Calculate several hours to build a daily curve, then add the values to estimate the energy of the day. For a project, use a database of measured data such as typical meteorological years. This tool is educational.