Skip to content
Omnikalc

Diffusion coefficient calculator: Stokes-Einstein, distance and time of diffusion

Enter the temperature, viscosity and particle radius to get the diffusion coefficient, the typical distance moved and the time to diffuse a given distance.

Updated on
Your inputs
°C

Value out of range

mPa·s

Value out of range

nm

Value out of range

s

Value out of range

µm

Value out of range

Results

Diffusion coefficient D (Stokes-Einstein)

98.149 µm²/s

Typical distance moved in one dimension in the given time (√(2Dt))
14.011 µm
Typical distance moved in three dimensions (√(6Dt))
24.267 µm
Time to diffuse the chosen distance in one dimension (L² ÷ 2D)
0.509 s

How fast does a particle spread through a liquid? The diffusion coefficient calculator takes the temperature, the viscosity and the radius of the particle, and gives the diffusion coefficient, the typical distance moved in a given time in one and three dimensions, and the time needed to diffuse a chosen distance.

How the calculation works

  • Enter the temperature, the viscosity of the medium in mPa·s and the hydrodynamic radius of the particle in nanometers.
  • The Stokes-Einstein equation gives the diffusion coefficient: D = k_B × T ÷ (6π × η × r), with k_B the Boltzmann constant and T in kelvin.
  • From D, the typical distance moved in a time t is √(2Dt) in one dimension and √(6Dt) in three dimensions.
  • The time to diffuse a distance L in one dimension is L² ÷ (2D). It grows with the square of the distance.

Example

A small protein with a radius of 2.5 nm in water at 25 °C and 0.89 mPa·s has D = 1.381 × 10⁻²³ × 298.15 ÷ (6π × 0.00089 × 2.5 × 10⁻⁹) = 98.2 µm²/s. In 1 s, it moves a typical 14.0 µm in one dimension. To diffuse 10 µm takes 10² ÷ (2 × 98.2) = 0.51 s.

Why it matters

Biophysics, chemistry and nanotechnology courses use the Stokes-Einstein relation to estimate how fast molecules, proteins and nanoparticles move, and to design experiments such as dynamic light scattering and fluorescence correlation.

Good to know

The viscosity of the medium changes strongly with temperature, so use a value that fits your conditions. The equation assumes a dilute solution and a spherical particle. Inside cells, the effective diffusion is often slower than the prediction.

The Stokes’ law calculator covers the drag force on a sphere, and the water viscosity calculator gives viscosity at a given temperature.

Frequently asked questions

What is the Stokes-Einstein equation?

It gives the diffusion coefficient of a sphere moving through a fluid: D equals the thermal energy kT divided by 6π times the viscosity times the radius. It links the random motion of a particle to the drag force of the fluid.

Why does the diffusion time grow with the square of the distance?

Diffusion is a random walk. The typical distance covered grows with the square root of time, so doubling the distance takes four times as long. That is why diffusion works well over cell-sized distances but is very slow over centimeters.

What is the hydrodynamic radius?

It is the radius of a sphere that would diffuse at the same rate as the particle, including any solvent that moves with it. For proteins it is usually larger than the radius calculated from the molecular mass alone.

How reliable is the equation?

It works best for spherical particles much larger than the solvent molecules, in dilute solutions. Small molecules, crowded cells and non-spherical shapes deviate from it, so treat the result as an estimate.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.