Skip to content
Omnikalc

Michelson interferometer calculator

Enter the wavelength, the mirror displacement and, if you want, the length and refractive index of a gas cell to get the number of fringes that cross the screen.

Updated on
Your inputs
nm

Value out of range

µm

Value out of range

mm

Value out of range

Value out of range

Results

Fringes for the mirror displacement

316.1

Mirror travel per fringe
316.40 nm
Fringes counted when the gas cell is filled
43.8
Cell length that gives one fringe at this index
1.14 mm
Resolution of a quarter fringe
79.10 nm

The Michelson interferometer calculator gives the number of fringes that cross the screen when a mirror moves, and the number counted when a gas cell is filled, from the wavelength of the light.

How the calculation works

  • Enter the wavelength of the light.
  • Enter the displacement of the mirror.
  • Enter the length of the gas cell and the refractive index of the gas, if you use one.
  • The calculator gives the fringes for the displacement, the travel per fringe, the fringes for the cell, the cell length for one fringe and the quarter fringe resolution.

Example

With a 632.8 nm helium neon laser, a mirror moved by 100 µm makes 2 × 100 / 0.6328 = 316.1 fringes pass, and each fringe stands for 316.40 nm of travel. A 50 mm cell filled with a gas of index 1.000277, as for air, gives 2 × 0.000277 × 50,000 / 0.6328 = 43.8 fringes.

Why it matters

The calculator helps students of optics, teachers who set up the experiment and laboratory staff who calibrate a stage or measure the index of a gas to know how many fringes they should count.

Good to know

Counting fringes by eye is tiring, so many setups use a photodiode and a counter, and read a quarter of a fringe, which is about 80 nm for a helium neon laser. Start with the beams well aligned so that the fringes are circular and centered, and tilt a mirror a little to make straight fringes that are easier to count. Do not touch the table during the count. Use the wavelength in vacuum for the light and the index of the gas to correct, and note that the air in the beam path changes the wavelength by about 3 parts in ten thousand. In the famous Michelson and Morley experiment, the same instrument looked for a shift of the fringes when it was rotated, and found none.

The double-slit calculator covers another interference experiment, the thin-film interference calculator gives the colors of films, the wavelength calculator converts frequency and wavelength and the refraction calculator gives the bending of light at a surface.

Frequently asked questions

How many fringes pass when a mirror moves?

The light goes to the moving mirror and back, so a displacement x changes the path by 2x. A fringe passes every time the path changes by one wavelength, so the number of fringes is N = 2x / λ. One fringe corresponds to a mirror travel of λ/2, about 316 nm for a helium neon laser.

How is a refractive index measured with it?

A cell of length L is placed in one arm and evacuated, then slowly filled with gas. The optical path in that arm changes by 2 (n − 1) L, so N = 2 (n − 1) L / λ fringes are counted. Inverting the formula gives n = 1 + N λ / (2L), which allows a precise index of a gas from a fringe count.

What limits the accuracy?

Vibrations, air currents and temperature drifts move the fringes, and the coherence of the source limits the useful path difference. The wavelength in air is also a little shorter than in vacuum, by the factor n. For precise work, use a stabilised laser and count in a quiet room.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.