Skip to content
Omnikalc

Multiply charged ion m/z calculator

Enter the neutral mass of a molecule, a charge state and the polarity to get the m/z of the ion and of its neighbors, the spacing between adjacent peaks and the resolving power needed to see the isotope pattern.

Updated on
Your inputs
Da

Value out of range

Value out of range

Results

m/z of the ion

1,237.007

Next charge state up
11
m/z with one more charge
1,124.644
Next charge state down
9
m/z with one charge less
1,374.341
Spacing between adjacent charge states
137.333
Spacing of isotope peaks
0.1003
Resolving power to see the isotopes
12,329

The multiply charged ion m/z calculator gives the m/z of an electrospray ion from the neutral mass and the charge state, the neighboring charge states, the spacing between peaks and the resolving power needed to see the isotopes.

How the calculation works

  • Enter the neutral mass and the charge state.
  • Pick the polarity.
  • The calculator gives the m/z, the neighbors, the spacing, the isotope spacing and the resolving power.

Example

A protein of 12,360 Da with 10 protons has m/z = (12,360 + 10 × 1.00728) / 10 = 1,237.007. With 11 charges it appears at 1,124.644, and with 9 at 1,374.341, so adjacent charge states are 137.333 apart. Isotope peaks are 1.00335 / 10 = 0.1003 apart, which needs a resolving power of about 12,329.

Why it matters

The calculator helps students and analysts in proteomics, biochemistry and analytical chemistry who read electrospray mass spectra and check which charge states a protein or peptide should show.

Good to know

The mass used is the neutral monoisotopic or average mass, depending on the instrument and on the size of the molecule, and for proteins the average mass is usual. The proton mass 1.00728 is used rather than the hydrogen atom mass because the electron is not added. Other adducts such as sodium or ammonium shift the peaks, and their mass must be used in place of the proton. A real spectrum shows a bell-shaped series of charge states, and software deconvolutes it to get the neutral mass. The isotope resolving power is an upper requirement, and for large proteins the envelope is often enough. Time-of-flight and Orbitrap instruments achieve these resolutions at the usual m/z.

The photon energy calculator covers light, the half-life calculator covers decay, the dilution calculator prepares samples and the wavelength calculator relates frequency and wavelength.

Frequently asked questions

How is the m/z computed?

In electrospray, large molecules pick up several protons. For z protons, the ion has a mass of M + z × 1.00728 and a charge z, so m/z = (M + z × 1.00728) / z. In negative mode, protons are removed instead, and the sign becomes minus.

How do I find the charge from two peaks?

For two adjacent peaks at m1 < m2, the charge of the first is z = (m2 − 1.00728) / (m2 − m1) and the mass is M = z × (m1 − 1.00728). This calculator goes the other way, from M and z to the peaks, which lets you check a deconvolution.

What resolving power is needed?

Isotope peaks of an ion with z charges are 1.00335 / z apart in m/z. To see them separated, the resolving power m/z divided by the spacing must be at least the value shown, which grows with the mass. Without it, only the envelope is seen.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.