Skip to content
Omnikalc

Octave band to dBA and dBC calculator

Enter the sound level in the eight octave bands from 63 Hz to 8 kHz to get the overall A-weighted, C-weighted and unweighted level.

Updated on
Your inputs
dB

Value out of range

dB

Value out of range

dB

Value out of range

dB

Value out of range

dB

Value out of range

dB

Value out of range

dB

Value out of range

dB

Value out of range

Results

Overall A-weighted level

50.0 dB(A)

Overall C-weighted level
63.3 dB(C)
Overall unweighted level
63.9 dB
C minus A difference
13.4 dB

The octave band to dBA calculator combines eight octave-band levels into the overall A-weighted level, the C-weighted level, the unweighted level and the difference between C and A.

How the calculation works

  • Enter the sound level in each octave band from 63 Hz to 8 kHz.
  • The calculator adds the standard A and C corrections to each band.
  • It converts each weighted level to energy, adds the energies and gives the overall levels, then the C minus A difference.

Example

A spectrum that falls from 62 dB at 63 Hz to 29 dB at 8 kHz, typical of a quiet office with ventilation, gives an overall level of 50.0 dB(A). The C-weighted level is 63.3 dB(C) and the unweighted level 63.9 dB. The difference of 13.4 dB between C and A shows how much of the noise is low frequency.

Why it matters

The calculator helps acoustic consultants, building services engineers, machine designers and safety officers who have octave-band data from a data sheet or a measurement and need the single dB(A) figure used in standards and regulations.

Good to know

A-weighting reduces the low frequencies strongly, so a noise that is loud at 63 and 125 Hz can have a modest dB(A) value and still be heard and felt. Compare the dB(A) and dB(C) values for such noise, and look at the spectrum itself. The calculation uses the corrections at the centre frequency of each octave, which is a good approximation for broadband noise. For legal compliance, such as occupational exposure limits or noise permits, use the measurement made with a class 1 or class 2 sound level meter. Combine several sources with the decibel addition calculator, and remember that the level depends on the distance and the room.

The decibel addition calculator adds sound levels, the noise exposure calculator checks the dose at work, the sound insulation calculator gives the reduction of a wall and the speaker SPL calculator gives the level of a loudspeaker.

Frequently asked questions

What is A-weighting?

A-weighting adjusts a sound level to follow the sensitivity of the human ear at moderate levels, which is lower at low and very high frequencies. A level in dB(A) is a standard measure for noise at work, in the environment and in product data. The octave band corrections are −26.2 dB at 63 Hz, −16.1 at 125, −8.6 at 250, −3.2 at 500, 0 at 1 kHz, +1.2 at 2 kHz, +1.0 at 4 kHz and −1.1 at 8 kHz.

How are the bands combined?

Sound levels do not add as numbers, they add as energy. Each band is converted to a power, 10 raised to a tenth of the weighted level, the powers are summed, and the total is converted back with 10 × log10. This is why two equal bands give a level 3 dB higher and why one loud band dominates the total.

What does the C minus A difference tell?

C-weighting is almost flat and keeps the low frequencies. A large difference between the C and A levels, above about 10 to 15 dB, shows that the noise has a strong low-frequency content, such as a fan, a compressor, a transformer or heavy traffic. This kind of noise travels through walls and is more annoying than the dB(A) value suggests.

How accurate is an octave band calculation?

The octave bands are wide, so the result is an approximation of a true A-weighted measurement, with an error of 1 dB or less for a smooth spectrum. For a tonal noise or a spectrum with a sharp peak, use one-third octave bands or a sound level meter that applies the weighting directly. The input levels should be measured over the same time.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.