Skip to content
Omnikalc

Reduced mass calculator: the effective mass of a pair of particles

Enter two masses to get the reduced mass, and add a force constant and a distance for the vibration frequency, the wavenumber and the center of mass.

Updated on
Your inputs
u

Value out of range

u

Value out of range

N/m

Value out of range

pm

Value out of range

Results

Reduced mass

6.8605 u

Reduced mass in kilograms
1.139 × 10⁻²⁶ kg
Vibration frequency of the pair
64,257,242,724,839 Hz
Vibration wavenumber
2,143.4 cm⁻¹
Distance of the center of mass from the first particle
64.43 pm
Reduced mass as a share of the lighter mass
57.12 %

Two bodies that attract each other move as if they were one lighter body. The reduced mass calculator takes the two masses, an optional force constant and a distance, and gives the reduced mass in atomic mass units and kilograms, the vibration frequency, the wavenumber, the position of the center of mass and the reduced mass as a share of the lighter mass.

How the calculation works

  • Enter the masses of the two bodies. For atoms and molecules, use atomic mass units (u). The calculator works with any two masses in the same unit.
  • The reduced mass is μ = m₁ × m₂ ÷ (m₁ + m₂). It is the mass of a single body that would behave like the pair when they interact through a central force.
  • Enter the force constant of the bond and the distance to get the vibration frequency f = (1 ÷ 2π) × √(k ÷ μ), the wavenumber and the position of the center of mass.
  • The reduced mass is always smaller than the lighter mass. When one body is much heavier, the reduced mass is close to the mass of the lighter one.

Example

In a carbon monoxide molecule, carbon has a mass of 12.011 u and oxygen 15.999 u. The reduced mass is 12.011 × 15.999 ÷ 28.010 = 6.8605 u, or 1.139 × 10⁻²⁶ kg. With a force constant of 1,857 N/m, the vibration frequency is 6.426 × 10¹³ Hz (a wavenumber of 2,143 cm⁻¹). For a bond length of 112.8 pm, the center of mass lies 64.43 pm from the carbon atom.

Why it matters

Physicists and chemists use the reduced mass to analyze molecular vibrations, atomic energy levels and two-body orbits. It also explains isotope effects, since a heavier isotope changes the reduced mass and so the spectrum.

Good to know

The vibration frequency uses a harmonic oscillator model with a single force constant, which is an approximation for real molecules. Anharmonicity lowers the observed frequencies a little. Use consistent units: u for the masses, newtons per meter for the force constant and picometers for the distance.

The spring-mass calculator covers the oscillator, and the center of mass calculator locates the balance point of several masses.

Frequently asked questions

What is the reduced mass?

It is an effective mass that turns a two-body problem into a one-body problem. For two bodies of masses m₁ and m₂ attracted by a central force, the relative motion behaves like a single body of mass μ = m₁m₂ ÷ (m₁ + m₂). It is used in orbital mechanics, atomic physics and molecular spectroscopy.

Why is it smaller than both masses?

Because the formula is like the parallel combination of two resistors: the result is smaller than either value. If one mass is much larger, μ is close to the smaller mass. If the two masses are equal, μ is half of either mass.

How does it give the vibration frequency of a molecule?

A diatomic molecule behaves like two masses joined by a spring. The frequency is f = (1 ÷ 2π)√(k ÷ μ), where k is the force constant of the bond. Heavier isotopes have a larger reduced mass and so a lower frequency, which is the basis of isotope shifts in spectra.

Where else is the reduced mass used?

In the hydrogen atom, the electron and the proton orbit their center of mass, and the reduced mass gives the correct energy levels. It also appears in two-body collisions and in the orbits of binary stars and planets.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.