Skip to content
Omnikalc

Saha ionization equation calculator

Enter the temperature, the particle density and the ionization energy to get the fraction of ionized atoms, the electron density and the Saha constant.

Updated on
Your inputs
K

Value out of range

Value out of range

eV

Value out of range

Value out of range

Results

Ionization fraction

80.72 %

Neutral fraction
19.28 %
Electron density (log₁₀ of m⁻³)
19.91
Saha constant (log₁₀ of m⁻³)
20.53
Thermal energy kT
0.862 eV
Ratio of ions to neutral atoms
4.186

The Saha equation calculator gives the ionization fraction of a gas, the neutral fraction, the electron density, the Saha constant, the thermal energy kT and the ratio of ions to neutral atoms from the temperature and the density.

How the calculation works

  • Enter the temperature of the gas and the logarithm of the total particle density in m⁻³.
  • Enter the ionization energy of the atom in electronvolts and the statistical weight factor.
  • The calculator solves the Saha balance for a pure gas.

Example

A gas at 10000 K, with a thermal energy of 0.862 eV, a density of 10^20 per m³ and an ionization energy of 13.6 eV has a Saha constant of 10^20.53. It is 80.72 % ionized and 19.28 % neutral, a ratio of 4.186, with an electron density of 10^19.91 per m³.

Why it matters

The calculator helps astronomy and physics students, plasma and spectroscopy researchers and teachers who study stellar atmospheres, flames or discharges, and who want to see how fast the ionization changes with the temperature.

Good to know

Use the correct ionization energy for the stage that you consider, 13.6 eV for neutral hydrogen, 24.6 eV for neutral helium, 54.4 eV for the second ionization of helium. The model assumes local thermodynamic equilibrium and one species of gas. In a mix, the electrons from other elements raise ne and reduce the ionization, which this calculator does not include. For very dense gases the ionization energy is lowered by the plasma, an effect ignored here. Densities are in m⁻³: multiply a density in cm⁻³ by 10⁶, so the log is increased by 6.

The blackbody radiation calculator gives the spectrum of a hot body, the photon energy calculator relates the ionization energy to a wavelength, the wavelength calculator converts frequencies and wavelengths and the pKa ionization calculator treats the ionization of an acid in solution.

Frequently asked questions

What does the Saha equation say?

The Saha equation gives the balance between neutral atoms and ions in a gas in thermal equilibrium: n(i+1) × ne / n(i) = (2 × g(i+1) / g(i)) × (2π × me × k × T / h²)^(3/2) × exp(−χ / kT). The ionization energy χ, the temperature T and the electron density set the fraction of ionized atoms. The ionization jumps from a few percent to nearly total in a narrow range of temperature.

How is the ionization fraction found?

With a pure gas of one element and electrons only from its ionization, ne = x × n and the balance becomes x² / (1 − x) = S / n, where S is the Saha constant and n the total density. The solution is x = (−S/n + √((S/n)² + 4 × S/n)) / 2. For hydrogen at 10 000 K and 10²⁰ m⁻³, the fraction is about 81 %.

What is the statistical weight factor?

It is 2 × g1 / g0, where g1 and g0 are the statistical weights of the ion and of the neutral atom in their ground state. The 2 is for the two spin states of the electron. For hydrogen, g0 = 2 and g1 = 1, so the factor is 1. For helium, it is 4 for the first ionization and 1 for the second.

Where is the Saha equation used?

It is used in the physics of stellar atmospheres, to determine the spectral lines that appear at a given temperature, in plasma physics for flames, arcs and lightning, and in the study of the interstellar medium. It requires thermodynamic equilibrium, which is not valid in low-density plasmas or when radiation is out of balance.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.