Skip to content
Omnikalc

Saponification value calculator: how much alkali does your oil need?

Enter the blank and sample titration volumes, the acid normality and the mass of oil to get the saponification value, the average molar mass of the triglycerides and the lye needed for 100 g.

Updated on
Your inputs
mL

Value out of range

mL

Value out of range

N

Value out of range

g

Value out of range

Results

Saponification value

190.7 mg KOH/g

In the usual range of fats and oils (about 130 to 290)
Average molar mass of the triglycerides
882.4 g/mol
Sodium hydroxide for 100 g of oil
13.60 g
Potassium hydroxide for 100 g of oil
19.07 g

Each oil needs a precise amount of alkali to become soap. The saponification value calculator converts a titration of an oil sample into its saponification value in mg of KOH per gram. It also gives the average molar mass of the triglycerides and the amount of NaOH or KOH needed for 100 g of the oil.

How the calculation works

  • Enter the volume of acid used in the blank titration and in the sample titration, in mL, with the normality of the hydrochloric acid.
  • Enter the mass of the fat or oil that you saponified with an excess of alcoholic potassium hydroxide.
  • The saponification value is SV = 56.1 × N × (B − S) / W, in mg of KOH per gram, where 56.1 is the molar mass of KOH.
  • The calculator also gives the average molar mass of the triglycerides and the NaOH or KOH needed to saponify 100 g of the oil.

Example

In the titration of an olive oil sample of 2.00 g, the blank needs 25.0 mL of 0.5 N HCl and the sample 11.4 mL. The saponification value is 56.1 × 0.5 × (25.0 − 11.4) / 2.00 = 190.7 mg KOH/g. The average molar mass of the triglycerides is 3 × 56,100 / 190.7 = 882.4 g/mol, and 100 g of the oil needs 13.60 g of NaOH.

Why it matters

The saponification value is a standard quality test for fats, oils and waxes in the food, soap and cosmetics industries. It helps to identify an oil, to detect adulteration, and to calculate the lye needed to make soap.

Good to know

The calculator follows the usual back-titration method and assumes that the oil is made of triglycerides, that all the fat saponifies and that the acid and the alcoholic KOH are standardized. Free fatty acids, which are neutralized by KOH too, are counted in the value, and the unsaponifiable matter (sterols, hydrocarbons) is not. The lye amounts are for pure NaOH or KOH, without the superfat, and a soap maker must adjust them to the purity of the lye.

The soap lye calculator gives the lye and water for a recipe, the titration calculator covers the general back-titration, the normality calculator converts between equivalents and moles, and the molarity calculator covers concentrations of solutions.

Frequently asked questions

What is the saponification value?

It is the number of milligrams of potassium hydroxide needed to saponify one gram of fat or oil, that is, to turn its triglycerides into glycerol and soap. A high value means short fatty acid chains and so a lower average molar mass: coconut oil is around 255, olive oil 190 and butter 225.

How is it measured?

A known mass of oil is boiled with an excess of alcoholic KOH. The KOH that is not used up is titrated with hydrochloric acid, with phenolphthalein as the indicator. A blank without oil is titrated in the same way, and the difference between the blank and the sample is the amount of KOH consumed by the oil.

How is it used in soap making?

The saponification value tells how much lye is needed for a given oil. NaOH needed = SV × 0.0713 per 100 g of oil, and a soap maker usually uses 5 to 8 % less than this value, a superfat, so that some oil stays unsaponified and the soap is mild. The value of each oil is on tables, and the titration is a way to check an unknown oil or an old one.

What does it say about the oil?

Since there are three fatty acid chains per triglyceride, the average molar mass is 3 × 56,100 / SV. A high SV points to short chains, as in coconut and palm kernel oils. A low SV, below about 170, points to long chains or to material that does not saponify, such as waxes or mineral oil, which is why the value is used to detect adulteration.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.