Skip to content
Omnikalc

Stellar luminosity calculator: how bright is a star?

Enter a star's radius in solar radii and its surface temperature to get its luminosity, absolute bolometric magnitude, peak wavelength and spectral class.

Updated on
Your inputs

Value out of range

K

Value out of range

Results

Luminosity, in solar luminosities

25.7

Class A: a white star
Luminosity in watts, as a power of ten (log10 of W)
27.99
Absolute bolometric magnitude
1.21
Wavelength of peak emission
292 nm

How bright is a star really, not as it looks from Earth? Its luminosity depends only on how large it is and how hot its surface is. This calculator takes the radius in solar radii and the surface temperature and gives the star’s luminosity in solar units and in watts, its absolute bolometric magnitude, its peak wavelength and its spectral class.

How the calculation works

  • Luminosity L = 4π R² σ T⁴ (Stefan-Boltzmann law)
  • In solar units L ÷ L☉ = R² × (T ÷ 5,772 K)⁴, with R in solar radii
  • In watts = L ÷ L☉ × 3.828 × 10²⁶ W, shown here as a power of ten
  • Absolute bolometric magnitude M = 4.74 − 2.5 × log10(L ÷ L☉)
  • Peak wavelength (Wien’s law) = 2,897.77 µm·K ÷ T

Example

Sirius A has a radius of about 1.711 solar radii and a surface temperature of 9,940 K. Its luminosity is 1.711² × (9,940 ÷ 5,772)⁴ = 25.7 times that of the Sun, or about 10²⁸ W (log10 of 27.99). The absolute bolometric magnitude is 1.21. The peak wavelength is 291 nm, in the ultraviolet, and its spectral class is A.

Why it matters

Luminosity is the link between what we see and what a star is. With a measured brightness and distance you get the luminosity; with luminosity and temperature you get the radius. This is how astronomers find the size of stars they cannot resolve, and how the Hertzsprung-Russell diagram sorts them into dwarfs, giants and supergiants.

Good to know

Real stars are not perfect black bodies, so results are within a few percent for most. Temperatures are effective temperatures. Giant stars have a low temperature but a very large radius, which more than makes up for it. The result is bolometric, covering all wavelengths, not just the visible band. This tool is for education.

The blackbody radiation calculator gives the power of a hot surface, the star distance calculator converts parallax, and the habitable zone calculator finds where liquid water is possible.

Frequently asked questions

How do you calculate a star's luminosity?

Treat the star as a black body: luminosity L = 4π R² σ T⁴, where R is the radius, T the surface temperature and σ the Stefan-Boltzmann constant. In solar units it simplifies to L = R² × (T ÷ 5,772 K)⁴.

Why does temperature matter so much?

Luminosity grows with the fourth power of temperature: a star twice as hot at the same size shines 16 times brighter. Radius counts only as its square.

What is the absolute bolometric magnitude?

It is a logarithmic measure of total power output across all wavelengths, on a scale where brighter stars have lower values. The Sun's is 4.74, and each drop of 5 means 100 times more luminous.

What does the peak wavelength tell me?

By Wien's law, the wavelength where a star radiates most is 2,897.77 µm·K divided by its temperature. The Sun peaks at about 502 nm in the green; hotter stars peak in the blue and ultraviolet, cooler ones in the red and infrared.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.