This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. Asbestos was used in homes built before the 1980s in insulation, popcorn ceilings, vinyl floor tiles, pipe wrap, siding and roofing. It is harmless while intact, but fibers released by sanding, cutting or breaking can cause lung disease decades later. Removal is a job for licensed abatement contractors, who seal the area, keep it under negative air pressure and dispose of the waste at approved sites. This calculator adds removal, testing, the air clearance test and disposal.
How the calculation works
- Removal = area × removal price per square foot
- Total cost = removal + testing + air clearance test + disposal fees
- Total per square foot = total ÷ area
Removing 200 sq ft of asbestos at $15 per square foot costs $3,000. With $500 of testing, a $400 air clearance test and $300 of disposal fees, the total is $4,200, or $21.00 per square foot.
Typical prices
| Item | Typical price |
|---|---|
| Asbestos inspection and lab testing | $250 to $800 |
| Popcorn ceiling removal | $3 to $7 per sq ft |
| Floor tile and mastic removal | $5 to $15 per sq ft |
| Pipe or boiler insulation | $15 to $40 per linear ft |
| Air clearance test after removal | $250 to $600 |
| Encapsulation instead of removal | $2 to $6 per sq ft |
Removal or encapsulation?
Material in good condition that you will not disturb can often be left in place or encapsulated with a sealant, which costs much less. Removal makes sense before a renovation or demolition that would disturb it, or when the material is damaged and crumbling.
Rules and permits
Federal rules apply mainly to larger and commercial projects, but many states and cities require licensed contractors, permits or advance notice even for homes, and set rules for disposal. Some allow homeowners to remove small amounts from their own single-family home, under strict conditions. Check with your state environmental or health agency before any work.
How to keep the cost down
- Test before you renovate, so you can plan around the material.
- Hire an inspector who is independent from the removal contractor.
- Get at least three quotes for the same scope.
- Ask whether part of the work can be encapsulated rather than removed.
- Plan the abatement before other trades start, to avoid costly delays.