Skip to content
Omnikalc

How much does mold removal cost?

Enter the affected area, the remediation price per square foot, the inspection and testing fee and the cost of fixing the moisture source: get the remediation cost, the total and the total per square foot.

Updated on
Your inputs
sq ft

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Total cost

$1,800

Total per sq ft

$36.00

The EPA suggests you can clean small areas under about 10 sq ft yourself with protection; larger areas, mold in HVAC ducts or after sewage flooding call for a professional, and mold always comes back unless the moisture is fixed
Remediation
$1,000

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. Mold grows wherever moisture lingers: after a leak or flood, in damp basements, bathrooms without good ventilation and behind furniture on cold walls. Removing it safely means containing the area, removing or cleaning affected materials and, above all, fixing the source of moisture. This calculator adds up the remediation, the inspection and the repair.

How the calculation works

  • Remediation = affected area × price per square foot
  • Total cost = remediation + inspection and testing + fixing the moisture source
  • Total per square foot = total ÷ affected area

Removing 50 sq ft of mold at $20 per square foot costs $1,000. With a $300 inspection and $500 to fix the leak, the total is $1,800, or $36.00 per square foot.

Typical prices

Job Typical range
Mold inspection and testing $250 to $600
Small area, under 10 sq ft $500 to $1,500
Bathroom or crawl space $1,500 to $5,000
Basement $2,000 to $10,000
Whole-house after flooding $10,000 to $30,000 or more

Remediation prices often run $10 to $30 per square foot and rise when drywall, insulation or subfloor must be removed.

Do it yourself or hire a pro?

The EPA suggests that small areas, under about 10 sq ft, can usually be cleaned by the homeowner with gloves, goggles and an N95 respirator, using detergent and water and drying everything quickly. Call a professional when:

  • the area is larger than about 10 sq ft
  • mold is in heating and cooling ducts
  • the water came from sewage or contaminated flooding
  • anyone in the home has asthma, allergies or a weak immune system

Fix the cause first

Mold always comes back if moisture remains. Repair leaks, improve ventilation with bathroom and kitchen fans, keep indoor humidity between 30 and 50% with a dehumidifier, and dry wet materials within 24 to 48 hours.

Insurance

Homeowners insurance may cover mold caused by a sudden, covered event such as a burst pipe, but usually not mold from long-term leaks, humidity or poor maintenance. Check your policy and document the damage with photos.

Frequently asked questions

How much does mold remediation cost?

About $1,800 for 50 sq ft at $20 per sq ft with testing and a leak repair.

How much does mold removal cost per square foot?

Usually $10 to $30; $36.00 per sq ft all-in in the default example.

Can I remove mold myself?

The EPA says areas under about 10 sq ft can usually be cleaned with protection.

Does homeowners insurance cover mold?

Usually only when caused by a sudden covered event such as a burst pipe.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.