Skip to content
Omnikalc

How much does it cost to convert an attic?

Estimate the cost of turning an attic into a bedroom or an office, with roof windows, a staircase and a contingency, and the cost per usable square foot.

Updated on
Your inputs
sq ft

Value out of range

$

Value out of range

Value out of range

$

Value out of range

$

Value out of range

%

Value out of range

%

Value out of range

Results

Total budget

$35,200

Cost per usable square foot

$147

Usable area with full headroom
240 sq ft
Cost per square foot of floor
$88
Before contingency
$32,000
Have the floor joists checked: attic floors are often not built for living space

An unused attic can become a bedroom, an office or a playroom without adding to the footprint of the house. Whether it is worth converting depends on the headroom, the floor structure and the access. This calculator estimates the budget and the cost per square foot of space you can actually stand up in.

The budget

Conversion work includes insulating the roof, reinforcing and laying the floor, framing and drywall, electrical, heating and cooling, and finishes. A common range is about $40 to $100 per sq ft of floor, depending on the finish and how much structural work is needed. At $60 per sq ft, a 400 sq ft attic costs $24,000.

Then add the items priced separately:

  • Skylights or roof windows: for light and ventilation, often $1,500 to $3,500 each installed; two at $2,500 add $5,000.
  • Stairs: a code-compliant staircase, not a pull-down ladder, often costs $2,000 to $5,000 or more, and takes space from the floor below.
  • Dormers: they add headroom and floor area but are a major structural job, often tens of thousands of dollars each.

With $3,000 for the stairs and a 10% contingency, the example totals $35,200.

Headroom is what counts

Under a sloped roof, only part of the floor is usable for standing. Building codes for habitable rooms generally require a ceiling height of about 7 ft over at least half the floor area, with the low parts usable only for storage. If 60% of the 400 sq ft has full headroom, the usable area is 240 sq ft, and the real cost is about $147 per usable sq ft rather than $88 per sq ft of floor.

Check before you start

  • Floor joists: attic floors are often built only to carry the ceiling below. Living space needs larger or doubled joists; a structural engineer can say what is needed.
  • Roof framing: stick-framed roofs with rafters leave open space; roofs built with W-shaped trusses are much harder to convert, since the webs cannot be cut without an engineered solution.
  • Egress: a bedroom needs a window large enough to escape through in a fire.
  • Insulation and ventilation: insulating the roof slope while keeping an air gap under the roof deck prevents condensation and summer overheating.
  • Permits: a conversion is a structural change and needs a permit and inspections.

A converted attic is often one of the better-value ways to add a bedroom, but get an engineer’s opinion on the structure before you budget the finishes.

Frequently asked questions

How much does an attic conversion cost?

About $35,200 for 400 sq ft at $60 per sq ft with 2 skylights, stairs and a 10% contingency.

How much headroom does an attic room need?

Codes generally require about 7 ft over at least half the floor area.

Can any attic be converted?

Not always: truss roofs and weak floor joists can make it hard; ask a structural engineer.

Does an attic bedroom need a window?

Yes, a bedroom needs an egress window large enough to escape through.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.