Skip to content
Omnikalc

How much does attic insulation cost, and how fast does it pay off?

Enter the attic area and the price per square foot, the air sealing, the baffles and access, any rebate, your yearly heating and cooling bill and the expected savings: get the total, your net cost, the yearly savings and the payback time.

Updated on
Your inputs
sq ft

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

%

Value out of range

Results

Your net cost

$2,500

Total cost
$2,500
Savings per year
$270
Payback time
9.3 years
Seal air leaks around light fixtures, pipes and the attic hatch before adding insulation, and keep soffit vents open with baffles; most US homes should reach about R-38 to R-60 in the attic

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. Adding insulation to the attic is one of the cheapest energy upgrades, because heat rises and a poorly insulated attic floor lets it escape all winter and pour in all summer. Blown-in cellulose or fiberglass is the usual choice for an open attic floor. This calculator multiplies the area by the price per square foot, adds air sealing and baffles, subtracts any rebate, and estimates your yearly savings and payback time.

How the calculation works

  • Insulation = attic area × price per sq ft
  • Total cost = insulation + air sealing + baffles and access hatch
  • Your net cost = total cost − rebate or incentive
  • Savings per year = yearly heating and cooling bill × expected savings
  • Payback time = net cost ÷ savings per year

Blowing insulation into a 1,000 sq ft attic at $1.80 per sq ft costs $1,800. With $500 of air sealing and $200 of baffles, the total is $2,500. Saving 15% of an $1,800 heating and cooling bill, or $270 a year, pays it back in about 9.3 years.

Typical prices

Item Typical price
Blown-in fiberglass or cellulose $1.00 to $2.50 per sq ft
Fiberglass batts $1.00 to $2.00 per sq ft
Spray foam under the roof deck $2.50 to $7.00 per sq ft
Air sealing the attic floor $300 to $1,500
Removing old or damaged insulation $1.00 to $2.00 per sq ft
Insulated attic hatch cover $50 to $300

How much insulation

Most US homes should have about R-38 to R-60 in the attic, depending on climate, which is roughly 12 to 20 inches of blown-in insulation. If you can see the tops of the ceiling joists, you almost certainly need more. Settled, wet or rodent-damaged insulation should be removed first.

Do it right

Seal air leaks before insulating: gaps around recessed lights, plumbing and wiring holes, chimneys and the hatch let warm, moist air into the attic and waste much of the benefit. Baffles keep insulation away from soffit vents so the roof can breathe. Keep insulation clear of chimneys and non-rated recessed lights. Many utilities offer rebates for attic insulation and air sealing, often after an energy audit.

Frequently asked questions

How much does attic insulation cost?

About $2,500 for 1,000 sq ft of blown-in insulation with air sealing and baffles.

How much can attic insulation save?

Often 10% to 20% of heating and cooling costs, about $270 a year in the default case.

How much attic insulation do I need?

About R-38 to R-60 in most of the US, or 12 to 20 inches of blown-in insulation.

Should I air seal before insulating?

Yes; sealing leaks first makes the insulation far more effective.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.