Skip to content
Omnikalc

How much does it cost to finish a basement?

Estimate the cost of turning an unfinished basement into living space, with or without a bathroom, and the cost per square foot.

Updated on
Your inputs
sq ft

Value out of range

$

Value out of range

Add a bathroom
$

Value out of range

%

Value out of range

Results

Total budget

$56,100

Cost per square foot

$70

Finishing the main space
$36,000
Bathroom
$15,000
Contingency
$5,100
Fix any water or moisture problem before you finish the walls

Finishing a basement is one of the cheapest ways to add living space to a house, since the foundation, the floor and the roof already exist. This calculator estimates the budget from the area and the cost per square foot, with an optional bathroom and a contingency.

Cost per square foot

A basic finished basement, with framing, insulation, drywall, electrical outlets and lighting, flooring and paint, often costs about $30 to $50 per sq ft, more for high-end finishes, a wet bar, a home theater or built-ins. At $45 per sq ft, 800 sq ft cost $36,000.

A bathroom adds plumbing, a fan vented outside and often a pump if the drain is below the sewer line; $15,000 is a common figure for a full basement bathroom. With a 10% contingency, the example project totals $56,100, about $70 per sq ft overall.

Before you start: water

The most important step is making sure the basement stays dry. Look for damp spots, efflorescence (white powder on the walls) and musty smells, and fix the causes first: grading that slopes away from the house, gutters and downspouts that discharge far from the walls, and, if needed, a drain tile system and sump pump. A dehumidifier keeps humidity below about 50% to prevent mold. Finishing over a moisture problem traps it behind the drywall.

Codes and safety

  • Egress: a basement bedroom needs an emergency escape window or door big enough to climb out of.
  • Ceiling height: building codes usually require about 7 ft of headroom for habitable rooms, with allowances for beams and ducts.
  • Fire safety: smoke alarms, and carbon monoxide alarms near fuel-burning appliances.
  • Radon: test before you finish; a mitigation system is cheaper to install while the space is open.
  • Permits: finishing a basement usually requires a permit and inspections for framing, electrical and plumbing.

Ways to save

  • Do the demolition, painting and flooring yourself, and hire licensed trades for electrical and plumbing.
  • Leave the mechanical room unfinished, with access to the furnace, the water heater and the panel.
  • Choose moisture-resistant materials: rigid foam on concrete walls, vinyl plank flooring.

Finished basement space often adds less to the sale price than above-grade space, so finish it for your own use rather than as an investment.

Frequently asked questions

How much does it cost to finish a basement?

Often about $30 to $50 per sq ft: $36,000 for 800 sq ft at $45, more with a bathroom.

How much does a basement bathroom add?

Often around $15,000, more if a pump is needed to lift the drain water.

What should I do before finishing a basement?

Fix any water or moisture problem, test for radon and check the permit rules.

Does a basement bedroom need a window?

Yes, building codes require an emergency escape window or door large enough to climb out.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.