Skip to content
Omnikalc

How much does basement waterproofing cost?

Enter the basement length and width, the drain price per linear foot, the sump pump, the cracks and the price per crack repair: get the perimeter, the drain cost, the total and the cost per square foot of basement.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

$

Value out of range

$

Value out of range

Value out of range

$

Value out of range

Results

Total cost

$12,000

Cost per sq ft of basement

$10.00

Start with the cheap fixes: clean gutters, extend downspouts at least 6 ft from the house and slope the soil away from the walls; interior drains manage water that gets in, while exterior membranes stop it but cost much more
Basement perimeter
140 ft
Drain cost
$9,800

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. A wet basement can ruin finishes, breed mold and damage stored belongings. Waterproofing ranges from cheap fixes outside the house to an interior drain system with a sump pump or a full exterior membrane. This calculator estimates the most common professional fix: an interior perimeter drain, a sump pump and crack repairs.

How the calculation works

  • Basement perimeter = 2 × (length + width)
  • Drain cost = perimeter × price per linear foot
  • Total cost = drain + sump pump + cracks × price per repair
  • Cost per square foot = total ÷ basement floor area

A 40 × 30 ft basement has a 140 ft perimeter. An interior drain at $70 per foot costs $9,800; with a $1,200 sump pump and 2 crack repairs at $500, the total is $12,000, or $10.00 per square foot of basement.

Typical prices

Fix Typical range
Gutter and downspout repairs $200 to $1,500
Regrading soil around the house $500 to $3,000
Crack injection $300 to $800 per crack
Interior drain tile $50 to $100 per linear ft
Sump pump installed $800 to $2,000
Exterior excavation and membrane $100 to $300 per linear ft

Start with the cheap fixes

Most basement water comes from the surface. Clean gutters, extend downspouts at least 6 ft from the house, slope the soil away from the foundation and fix window wells. These steps can solve a damp basement for a few hundred dollars.

Interior or exterior?

  • Interior drain and sump pump: collects water that gets in at the base of the wall and pumps it out. Less disruptive and cheaper, and the most common choice.
  • Exterior waterproofing: excavates around the foundation to apply a membrane and drain. It stops water before it reaches the wall but costs far more and disturbs landscaping.
  • Sealants and coatings: help with dampness but not with water under pressure.

Before you sign

Get at least three quotes, ask for a transferable warranty, check whether the sump pump has a battery backup and an alarm, and ask how the system handles a power outage. If the walls are bowing or cracks are wider than about 1/4 in, have a structural engineer look first.

Frequently asked questions

How much does basement waterproofing cost?

About $12,000 for a 40 × 30 ft basement with an interior drain, sump pump and 2 crack repairs.

How much does an interior drain cost per foot?

Usually $50 to $100; $70 per foot gives $9,800 for 140 ft.

What does waterproofing cost per square foot?

About $10.00 per sq ft of basement in the default example.

What should I try first for a wet basement?

Clean gutters, extend downspouts and slope the soil away.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.