Skip to content
Omnikalc

How much does a boulder weigh?

Enter the length, width and height of the rock, its shape and the type of stone: get the volume, the weight in pounds and the weight in tons.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

Results

Weight

1,056 lb

Too heavy to lift by hand: use a dolly, bar and rollers, or a small machine

Weight in short tons

0.53 tons

Volume
6.3 cu ft

Landscape boulders are heavier than they look, and knowing the weight before delivery decides whether you need a dolly, a skid steer or a crane truck. This calculator estimates a rock’s volume from its length, width and height, adjusts for its shape, and multiplies by the density of the stone.

How the calculation works

  • Volume = length × width × height × shape factor
  • Weight = volume × density of the stone
  • Tons = weight ÷ 2,000

The shape factor corrects for the fact that a boulder does not fill its bounding box. A rounded, egg-like rock is close to an ellipsoid, whose volume is π ÷ 6, or about 0.52, of the box. An irregular, chunky rock is closer to 0.65, and a squared-off block or slab is close to 1.

A rounded granite boulder 3 × 2 × 2 ft holds about 6.3 cu ft. At 168 lb per cu ft, it weighs about 1,056 lb, or 0.53 short tons.

Density of common stone

Stone Weight per cubic foot
Sandstone about 145 lb
Limestone about 160 lb
Granite about 168 lb
Basalt about 187 lb

These are typical values for solid stone. Porous rock such as lava rock or tufa is much lighter, sometimes under 100 lb per cubic foot, while dense, dark stone can be heavier.

Measuring a boulder

Measure the longest length, the widest width at right angles, and the height from the ground to the top. For a rock that is already half buried, measure only the part you plan to move, or dig around it to see its shape: much of a field boulder can be below ground.

Moving heavy rock

  • Up to about 100 to 150 lb, two people with good lifting technique or a hand truck can manage.
  • A few hundred pounds calls for a pry bar, rollers or planks, and a sturdy dolly.
  • Over a ton, use a machine such as a skid steer or mini excavator, or have the supplier place it with a boom truck.
  • Check that driveways, lawns and buried pipes can take the weight of the machine and the rock.

Placing it naturally

Bury about a third of a boulder so it looks like it has always been there, with the broadest face toward the main view. Group rocks in odd numbers and of different sizes, and choose stone that matches the local geology for the most natural look.

Frequently asked questions

How much does a 3 × 2 × 2 ft boulder weigh?

About 1,056 lb for rounded granite, or 0.53 short tons.

How much does a cubic foot of granite weigh?

About 168 lb.

How do I estimate the volume of a rounded rock?

Multiply length × width × height by about 0.52, the ellipsoid factor.

When do I need a machine to move a boulder?

Over a ton, plan a skid steer, mini excavator or boom truck.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.