Cornhole boards are one of the easiest backyard games to build: a plywood top, a simple frame and two folding legs. This calculator works out how many boards you are building, the plywood and frame lumber to buy, and how much flat ground you need to play.
How the calculation works
- Boards = sets × 2
- Plywood sheets = boards ÷ 4, rounded up, since a 4 × 8 ft sheet holds four 24 × 48 in tops
- Frame and leg lumber = boards × (2 × (width + length) + 2 × leg height) ÷ lumber length, rounded up
- Court length = distance between board fronts + 2 × board length + 2.5 ft behind each board
- Court width = board width + a 3 ft pitcher’s box on each side
One set of two 24 × 48 in boards takes 1 sheet of plywood and 4 lengths of 8 ft 2 × 4 for the frames and 12 in back legs. With the fronts 27 ft apart, as in official play, the court is about 40 ft long and 8 ft wide.
Regulation dimensions
| Item | Size |
|---|---|
| Board top | 24 × 48 in |
| Hole | 6 in across, centered 9 in from the top edge |
| Front height | 2.5 to 4 in |
| Back height | 12 in |
| Distance between fronts | 27 ft for adults, often 21 ft for kids or casual games |
| Bags | 6 × 6 in, about 16 oz each |
Building tips
- Use 1/2 or 3/4 in sanded plywood for the top; thin tops bounce bags off.
- Build the frame from 2 × 4s on edge, glued and screwed, and add a center brace under the top.
- Mount the legs with a carriage bolt so they fold flat for storage.
- Cut the hole with a jigsaw or a 6 in hole saw, then sand the edge smooth.
- Paint or stain, then finish with several coats of a slick polyurethane so bags slide evenly.
Setting up the court
Choose flat ground with a little room around it for players and spectators. On grass, check the boards sit level and don’t rock. Players stand in the pitcher’s box beside their board and throw to the opposite board, so keep chairs and coolers out of those boxes.