Skip to content
Omnikalc

Fineness modulus calculator: how coarse is your sand?

Enter the percent retained on each standard sieve to get the fineness modulus and the percent passing the main sieves.

Updated on
Your inputs
%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

Results

Fineness modulus

2.86

Within the 2.3 to 3.1 range of ASTM C33 for concrete sand
Percent passing the No. 4 sieve
97.0 %
Percent passing the No. 16 sieve
65.0 %
Percent passing the No. 50 sieve
19.0 %
Percent passing the No. 100 sieve (in the pan)
7.0 %

Before mixing concrete or mortar, it helps to know how coarse the sand is. The fineness modulus calculator takes the percent retained on each of the six standard sieves of a fine aggregate analysis, and gives the fineness modulus, the percent passing the No. 4, No. 16, No. 50 and No. 100 sieves, and a check on the range for concrete sand.

How the calculation works

  • Sieve a dry sand sample through the standard stack and weigh what stays on each sieve. Enter each weight as a percent of the whole sample retained, from the No. 4 sieve to the No. 100 sieve.
  • The calculator adds them up to get the cumulative percent retained on each sieve.
  • The fineness modulus is the sum of the cumulative percentages retained on the six sieves divided by 100.
  • A fine sand gives a low number and a coarse sand a high one. Concrete sand usually falls between 2.3 and 3.1 in ASTM C33.

Example

A sand sample leaves 3, 12, 20, 24, 22 and 12 percent on the No. 4, 8, 16, 30, 50 and 100 sieves. The cumulative percentages retained are 3, 15, 35, 59, 81 and 93. Their sum is 286, so the fineness modulus is 2.86, a medium-coarse sand inside the 2.3 to 3.1 range. 97 % passes the No. 4 sieve, 65 % passes the No. 16 and 7 % reaches the pan, finer than 150 µm.

Why it matters

The fineness modulus is a quick way to compare sand deliveries, to check that a supplier’s sand is consistent from load to load and to decide how a mix may need to change. A drift of 0.2 or more is a sign to review the mix design.

Good to know

Only the six sieves of the fine aggregate series are used, and the calculator assumes dry weights and a standard test sample. Two sands with the same modulus can have different gradings, so check the grading limits too. Follow the standard test method in your region and the requirements in your project specification.

The concrete volume calculator sizes a pour, the concrete curing calculator helps plan curing, the sand calculator estimates quantities, and the gravel calculator estimates coarse aggregate.

Frequently asked questions

What is the fineness modulus?

It is a single number that describes how coarse or fine an aggregate is, found from a sieve analysis. It is the sum of the cumulative percentages retained on a standard series of sieves, divided by 100. A higher value means a coarser material. Two very different gradings can give the same number, so it is a summary and not a full description.

Which sieves are used?

For fine aggregate, the standard series is the No. 4, 8, 16, 30, 50 and 100 sieves, with openings of 4.75 mm down to 150 µm. For a full grading of coarse aggregate, larger sieves are also included. This calculator uses the six sieves of the fine aggregate series.

What range is good for concrete?

ASTM C33 requires a fineness modulus of fine aggregate between 2.3 and 3.1. A lower value means a fine sand that needs more water and cement paste to reach the same workability. A higher value gives a harsher, less cohesive mix. The value should stay within 0.2 of the one used for the mix design.

Why is the pan percentage shown?

What passes the finest sieve ends up in the pan. The percentages retained on the six sieves should add up to a little less than 100, and the rest is the fine material in the pan. If the sum goes above 100, there is an error in the weighing, and the calculator flags it.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.