Skip to content
Omnikalc

How many grab bars do you need and what do they cost?

Enter the bathrooms, the bars per bathroom, the price per bar and the installation per bar: get the number of bars, the materials, the installation and the total cost.

Updated on
Your inputs

Value out of range

Value out of range

$

Value out of range

$

Value out of range

Results

Grab bars

6

Total cost

$690

Fix every bar into studs, solid blocking or with anchors rated for grab bars, never with drywall plugs; put a horizontal bar 33 to 36 in above the floor beside the toilet and in the shower, and a vertical bar at the tub entry
Materials
$240
Installation
$450

Grab bars are one of the cheapest and most effective ways to prevent falls in the bathroom, where wet floors and the effort of sitting down and standing up cause many injuries. This calculator counts the bars you need across your bathrooms and adds up the cost of the bars and of having them installed.

How the calculation works

  • Grab bars = bathrooms × bars per bathroom
  • Materials = grab bars × price per bar
  • Installation = grab bars × installation per bar
  • Total cost = materials + installation

Two bathrooms with 3 grab bars each need 6 bars. At $40 per bar, the bars cost $240, and installation at $75 per bar comes to $450, for $690 in all.

Where to put grab bars

Location Bar Typical position
Beside the toilet horizontal, 36 to 42 in long 33 to 36 in above the floor
Shower back wall horizontal, 24 to 36 in long 33 to 36 in above the floor
Tub or shower entry vertical, 18 to 24 in long at the edge you step over
Tub side wall horizontal or angled above the tub rim, where you push up

These heights follow common accessibility guidance; for someone with specific needs, an occupational therapist can suggest the best places.

Installing them safely

  • Anchor every bar properly: screw into wall studs, solid wood blocking, or use anchors specifically rated for grab bars. Plastic drywall plugs will pull out under a person’s weight.
  • Look for a weight rating: good bars are rated to hold at least 250 lb; ADA guidance calls for 250 lb of force.
  • Choose a grip: a 1.25 to 1.5 in diameter with a textured or knurled finish is easiest to hold with wet hands.
  • Tile: drilling through tile needs a diamond or carbide bit and sealant around each screw to keep water out of the wall.

Bars that look like accessories

Many brands now make grab bars that double as towel bars, toilet paper holders or shower shelves, so the bathroom does not look clinical. Do not rely on an ordinary towel bar or a suction-cup handle for support, because neither is built to take a person’s weight.

Cost tips

A handyman usually charges less per bar when several are installed in one visit, so plan all the bathrooms at once. Some local aging-in-place programs install grab bars for free or at low cost for seniors.

Frequently asked questions

How much does it cost to install grab bars?

About $690 for 6 bars at $40 each plus $75 each to install.

How many grab bars does a bathroom need?

Usually 3: one by the toilet, one in the shower or along the tub, one vertical at the entry.

How high should grab bars be?

Horizontal bars are usually 33 to 36 in above the floor.

Can grab bars go into drywall?

Only with anchors rated for grab bars; otherwise screw into studs or blocking.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.