Every fall, a yard with a few mature trees can produce dozens of bags of leaves. This calculator estimates the volume of leaves on the ground, how many bags they fill once packed, and how much shredding them first with a mower saves.
Estimating leaf volume
Measure the area covered by leaves and their average depth. Fresh, fluffy leaves often pile 2 to 6 in deep under trees and thinner across open lawn. The loose volume is the area times the depth. A 3,000 sq ft yard under 2 in of leaves holds 3,000 × 2 ÷ 12 = 500 cu ft, about 18.5 cu yd or 3,740 gallons.
Packing the bags
Leaves are mostly air. Pressing them down in the bag, or stepping on them, often cuts the volume in half. With 50% saved, 3,740 gallons become about 1,870 gallons, which fill 63 bags of 30 gallons. At $0.50 a bag, that is about $32.
Shred them first
Running a mower over dry leaves chops them into small pieces and reduces their volume about tenfold. The same yard then fills only 7 bags. A mulching mower or a leaf vacuum with a shredder makes this even easier.
Better still, shredded leaves do not need to leave your yard at all:
- Leave them on the lawn: a thin layer of shredded leaves breaks down over winter and feeds the soil. Make sure you can still see grass between the pieces.
- Mulch beds: spread 2 to 3 in around shrubs and perennials to protect roots and hold moisture.
- Compost: leaves are an excellent brown material to balance kitchen scraps and grass clippings.
- Leaf mold: pile wet leaves in a wire bin and wait a year or two for a crumbly soil conditioner.
Bags and pickup
Many cities only collect leaves in paper lawn bags, which compost along with the leaves, and some limit the number of bags per pickup. Check your local rules and collection dates. Avoid burning leaves: smoke irritates lungs, and many places forbid it.
Timing
Wait until most leaves have fallen, but do not leave a thick, wet mat on the grass for weeks, since it smothers the lawn and invites mold. Two or three sessions through the season are often easier than one big day.