Firewood burns best when it has dried for a season or more under a roof, with air moving through the stack. This calculator sizes a log store from the wood you burn each winter, the log length, the stack height and the number of rows, with a little extra room for airflow.
How the calculation works
- Stacked volume = cords per winter × winters stored × 128 cu ft
- Depth of the stack = rows × log length
- Store length = stacked volume × (1 + airflow allowance) ÷ (stack height × depth)
- Floor depth = stack depth + 1 ft of overhang at the front
- Floor area = store length × floor depth
3 cords for one winter is 384 cu ft of stacked wood. Stacked 6 ft high in 2 rows of 16 in logs, with 10% for airflow, the store needs to be about 26.4 ft long. With a 1 ft overhang the floor is about 3.7 ft deep, so about 97 sq ft.
What is a cord?
A full cord is a tidy stack 4 ft high, 4 ft deep and 8 ft long: 128 cu ft of wood and air. A face cord, or rick, is a single row 4 ft high and 8 ft long of shorter logs, often 16 in, so it is only a third of a cord. Always check which one a seller means before comparing prices.
Design tips
- Raise the wood off the ground on pallets, rails or a slatted floor, so it does not wick up moisture.
- Keep the sides open or slatted: wind does most of the drying.
- Make the roof overhang the front and back, and slope it away from the opening.
- Two bays, one for this winter and one drying for next, keep a steady supply of seasoned wood.
- Leave a gap between the stack and any wall of the house to limit insects and let air pass.
How much do you burn?
A wood stove used as the main heat source in a cold climate can burn 3 to 6 cords a winter; occasional fires in an open fireplace may use less than one. If you are unsure, track one season and adjust the store for the next. The firewood calculator helps convert a stack you already have into cords and heat.