Skip to content
Omnikalc

How long and how much to pressure wash a driveway or deck?

Estimate the cleaning time and water a pressure washer uses for a driveway, deck or siding, and compare renting a machine with hiring a pro.

Updated on
Your inputs
sq ft

Value out of range

gpm

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

Results

Cleaning time

2.5 h

Water used

375 gal

Do-it-yourself cost (rental and water)
$92
Professional cleaning
$300
Saved by doing it yourself
$208
Renting is cheaper, but count your time and a surface cleaner for large flat areas
Water cost
$1.88

A pressure washer strips years of grime from a driveway, patio, deck or siding in an afternoon. Before you rent one, it helps to know how long the job will take, how much water it will use and whether a professional would cost much more. This calculator estimates all three.

How the time is estimated

Cleaning speed depends on the surface and the tool. With a standard wand, most people clean about 400 sq ft of concrete an hour. A wood deck goes slower, around 250 sq ft an hour, because you need a wider fan tip, lower pressure and more care to avoid raising the grain. Vinyl siding is faster at about 500 sq ft an hour since you mostly rinse from a distance. A rotary surface cleaner attachment can double the speed on large flat concrete.

The time is simply the area divided by the speed. For a 1,000 sq ft driveway at 400 sq ft an hour, that is 2.5 hours of spraying, plus setup and cleanup.

How much water a pressure washer uses

A pressure washer uses far less water than a garden hose for the same area, but it still adds up. Electric models use around 1.2 to 1.8 gallons per minute and gas models 2 to 4 gpm. At 2.5 gpm, 2.5 hours of washing uses 60 × 2.5 × 2.5 = 375 gallons. At $5 per 1,000 gallons, the water itself costs under $2.

Make sure your outdoor tap delivers at least the machine’s rated flow, or the pump can run dry and overheat.

DIY rental or a professional?

Renting a gas pressure washer for a day typically costs $70 to $110. Professionals often charge $0.20 to $0.40 per square foot for flat concrete, more for decks that need stripping or sealing. In the default example, renting costs about $92 including water, against $300 for a pro, a saving of about $208.

The saving shrinks once you count your time, a surface cleaner rental and any detergent. Pros also bring hot-water units that cut through oil stains much better.

Safety tips

  • Never point the wand at people, pets or your own feet; the jet can cut skin.
  • Use a 25° or 40° tip for most cleaning and keep the nozzle 12 in or more from wood.
  • Avoid spraying upward under siding laps, windows and vents, where water gets behind the wall.
  • Wear eye protection and closed shoes.

Frequently asked questions

How long does it take to pressure wash a driveway?

About 2.5 hours for 1,000 sq ft of concrete at 400 sq ft an hour, plus setup.

How much water does a pressure washer use?

About 1.2 to 4 gallons a minute, so 375 gallons for 2.5 hours at 2.5 gpm.

How much do pros charge for pressure washing?

Often $0.20 to $0.40 per sq ft for flat concrete, more for decks.

What tip should I use on a wood deck?

A 25° or 40° tip at low pressure, held 12 in or more from the boards.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.