Skip to content
Omnikalc

How many privacy screen rolls do I need?

Enter the length to cover, the roll length and the overlap: get the rolls to buy, the leftover, the zip ties for the top and bottom edges and the cost.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

in

Value out of range

in

Value out of range

$

Value out of range

Results

Rolls to buy

2

Zip ties (top and bottom edges)

92

A solid screen catches the wind like a sail: add ties in the middle and check that the fence posts can take the load

Cost of the rolls

$80

Leftover after the overlaps
4.7 ft

A privacy screen fixed to a chain-link or wire fence is a quick way to block the view from the street or a neighbor’s yard. This calculator works out how many rolls you need for the length to cover, the leftover after overlapping the joints, the zip ties for the top and bottom edges and the cost.

How the calculation works

  • Rolls = (length to cover − overlap) ÷ (roll length − overlap), rounded up
  • Leftover = rolls × roll length − overlaps − length to cover
  • Zip ties = 2 edges × (length ÷ tie spacing, rounded up, + 1)
  • Cost = rolls × price per roll

For 45 ft of fence with 25 ft rolls overlapped by 4 in at the joint, you need 2 rolls, with about 4.7 ft left over. With a zip tie every 12 in along the top and bottom edges, plan 92 ties. At $40 a roll, the screen costs $80.

Choosing the screen

Type Privacy Wind load
Knitted shade fabric, about 85 to 90% High Moderate, lets some air through
Solid vinyl or PVC strips Total High
Reed, bamboo or brushwood rolls High Moderate
Woven slats in chain-link Medium to high Moderate

The more opaque the screen, the more it acts like a sail. A solid screen on a light fence can bend posts or tear loose in a storm.

Installation tips

  • Buy rolls that match the fence height, or slightly lower, so the screen does not flap above the top rail.
  • Start at a corner post and pull the screen tight before tying the next section.
  • Add a row of ties along a middle wire on tall fences or in windy spots.
  • Use UV-resistant ties; cheap ones turn brittle in a season or two.
  • Leave a small gap at the bottom so water and debris can pass.

Before you start

Check local rules: some towns and homeowner associations limit the height or the look of fences and screens facing the street. On a shared fence, agree with your neighbor first, because the screen is visible from both sides.

Frequently asked questions

How many privacy screen rolls for 45 ft?

2 rolls of 25 ft with a 4 in overlap, leaving about 4.7 ft.

How many zip ties for a privacy screen?

About 92 for 45 ft with a tie every 12 in on the top and bottom edges.

How much should privacy screen sections overlap?

A few inches, here 4 in, so no gap opens at the joint.

Does a privacy screen add wind load?

Yes; the more opaque the screen, the more it acts like a sail on the fence posts.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.