A row cover or frost cloth protects plants from frost, insects and wind while letting light and rain through. This calculator works out how wide and long the fabric must be to cover the bed over its hoops with enough left over to anchor, the area to buy, the number of hoops and the pins or weights to hold the edges.
How the calculation works
- Fabric width = bed width + 2 × hoop height + 2 × anchoring edge
- Fabric length = bed length + 2 × hoop height + 2 × anchoring edge
- Area = width × length
- Hoops = bed length ÷ spacing, rounded up, + 1 (none for a floating cover)
- Pins = perimeter ÷ pin spacing, rounded up
For a 20 × 4 ft bed under 2 ft hoops with 6 in of edge on each side, the fabric must be 9.0 ft wide and 25.0 ft long, 225 sq ft. Hoops every 4 ft means 6 hoops, and pins every 3 ft around the edge come to 23 pins.
The hoop height is added on both sides because the fabric goes up and over the arch. A semicircular hoop actually needs a little more, so round up when you buy.
Which weight of fabric?
| Use | Fabric |
|---|---|
| Insect barrier, summer | Lightest weight, lets most light through |
| Light frost, spring and fall | Medium weight, a few degrees of protection |
| Hard frost | Heavy weight, or two layers, or a cold frame |
Heavier fabric holds more heat but lets in less light, so do not leave it on day after day when the weather is mild.
Floating covers and hoops
Light fabric can rest directly on sturdy crops such as brassicas and potatoes; set the hoop height to 0 and leave plenty of slack so the plants can grow. Tender crops, tall plants and heavier fabric need hoops so the cloth does not crush or freeze onto the leaves.
Anchoring
Wind is the main enemy. Use landscape pins, sandbags, boards or soil along the edges, every 3 ft or closer on exposed sites. Clips hold the fabric to the hoops.
Pollination
Remove or open the cover when squash, cucumbers and melons start to flower, so bees can reach them, unless you plan to pollinate by hand.